STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STL9N60M2
Details bekijken DataSheets

STL9N60M2

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, lighting, and motor control
Characteristics: High voltage capability, low input capacitance, and fast switching speed
Package: TO-220
Essence: N-channel enhancement mode power MOSFET
Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Voltage Rating: 600V
  • Continuous Drain Current: 9A
  • RDS(ON): 1.3Ω
  • Gate Threshold Voltage: 2-4V
  • Maximum Power Dissipation: 75W
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low input and output capacitance for high-speed switching
  • Enhanced avalanche energy capability
  • Low gate charge for reduced drive requirements
  • Improved dv/dt ruggedness

Advantages and Disadvantages

Advantages: - Fast switching speed - High voltage capability - Low input capacitance

Disadvantages: - Higher RDS(ON) compared to some alternative models - Limited operating temperature range

Working Principles

The STL9N60M2 operates on the principle of an N-channel enhancement mode power MOSFET. When a sufficient voltage is applied to the gate terminal, it allows current to flow between the drain and source terminals, effectively acting as a switch in various power electronic applications.

Detailed Application Field Plans

The STL9N60M2 is suitable for use in: - Power supplies - Lighting systems - Motor control circuits - Inverters - Switched-mode power supplies

Detailed and Complete Alternative Models

  1. STP9NK60ZFP
  2. STB9NK60ZT4
  3. STF9NK60ZD

In conclusion, the STL9N60M2 is a high-voltage power MOSFET designed for efficient switching in various power electronic applications. Its fast switching speed and high voltage capability make it suitable for use in power supplies, lighting, and motor control circuits.

[Word count: 306]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STL9N60M2 in technische oplossingen

  1. What is the maximum drain-source voltage rating of the STL9N60M2 MOSFET?

    • The maximum drain-source voltage rating of the STL9N60M2 is 600V.

  2. What is the continuous drain current rating of the STL9N60M2 MOSFET?

    • The continuous drain current rating of the STL9N60M2 is 9A.

  3. Can the STL9N60M2 be used in high-frequency switching applications?

    • Yes, the STL9N60M2 is suitable for high-frequency switching due to its low input and output capacitance.

  4. What is the typical on-resistance of the STL9N60M2 MOSFET?

    • The typical on-resistance of the STL9N60M2 is 1.2 ohms.

  5. Is the STL9N60M2 suitable for use in power supply and motor control applications?

    • Yes, the STL9N60M2 is commonly used in power supply and motor control applications due to its high voltage and current ratings.

  6. Does the STL9N60M2 require a heat sink for operation?

    • Depending on the application and operating conditions, a heat sink may be required to ensure proper thermal management for the STL9N60M2.

  7. What are the typical gate charge characteristics of the STL9N60M2?

    • The typical gate charge characteristics of the STL9N60M2 make it suitable for fast switching applications.

  8. Can the STL9N60M2 be used in automotive electronic systems?

    • Yes, the STL9N60M2 is designed to meet automotive quality and reliability standards, making it suitable for automotive electronic systems.

  9. What are the recommended operating temperature ranges for the STL9N60M2?

    • The recommended operating temperature range for the STL9N60M2 is typically -55°C to 150°C.

  10. Are there any specific layout considerations when using the STL9N60M2 in a PCB design?

    • Proper attention to layout considerations such as minimizing parasitic inductance and ensuring adequate thermal dissipation is important when using the STL9N60M2 in a PCB design.