STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STL8N10F7
Details bekijken DataSheets

STL8N10F7

Product Overview

Category

The STL8N10F7 belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification applications.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The STL8N10F7 is typically available in a TO-220 package.

Essence

This MOSFET is essential for controlling high-power loads in various electronic devices and systems.

Packaging/Quantity

It is usually packaged individually and sold as single units.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 8A
  • On-Resistance (RDS(on)): 0.75Ω
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 16nC

Detailed Pin Configuration

The STL8N10F7 has three pins: 1. Drain (D) 2. Source (S) 3. Gate (G)

Functional Features

  • High voltage capability allows for use in various applications.
  • Low input capacitance enables fast switching speeds.
  • Low on-resistance minimizes power loss and heat generation.

Advantages

  • Suitable for high-power applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful handling due to its sensitivity to static electricity

Working Principles

The STL8N10F7 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The STL8N10F7 is widely used in: - Switching power supplies - Motor control circuits - LED lighting systems - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models to the STL8N10F7 include: - IRF540N - FQP30N06L - IRLB8743

In conclusion, the STL8N10F7 power MOSFET offers high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of electronic applications.

Word Count: 311

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STL8N10F7 in technische oplossingen

  1. What is STL8N10F7?

    • STL8N10F7 is a power MOSFET transistor designed for use in various technical solutions requiring high power switching and efficient energy management.

  2. What are the key specifications of STL8N10F7?

    • The key specifications of STL8N10F7 include a drain-source voltage (VDS) of 100V, continuous drain current (ID) of 8A, and low on-resistance (RDS(on)).

  3. In what technical applications can STL8N10F7 be used?

    • STL8N10F7 is commonly used in applications such as motor control, power supplies, DC-DC converters, and LED lighting due to its high power handling capabilities.

  4. How does STL8N10F7 contribute to energy efficiency in technical solutions?

    • By offering low on-resistance and high current-handling capabilities, STL8N10F7 helps minimize power losses and improve overall energy efficiency in various applications.

  5. What are the thermal considerations when using STL8N10F7 in technical solutions?

    • Proper heat sinking and thermal management are crucial when using STL8N10F7 to ensure that it operates within its specified temperature range and maintains reliability.

  6. Does STL8N10F7 require any specific driving circuitry or protection measures?

    • STL8N10F7 may require appropriate gate driving circuitry and overcurrent/overvoltage protection to ensure safe and reliable operation in technical solutions.

  7. Can multiple STL8N10F7 transistors be paralleled for higher power applications?

    • Yes, multiple STL8N10F7 transistors can be paralleled to handle higher currents and power levels, but careful attention must be paid to balancing current sharing.

  8. What are the typical challenges associated with integrating STL8N10F7 into technical designs?

    • Challenges may include layout considerations, minimizing parasitic effects, and ensuring proper ESD protection to maximize performance and reliability.

  9. Are there any recommended application circuits or reference designs for using STL8N10F7?

    • Manufacturers often provide application notes and reference designs to assist engineers in implementing STL8N10F7 in various technical solutions.

  10. Where can I find additional resources and support for designing with STL8N10F7?

    • Additional resources, including datasheets, application notes, and technical support, can typically be found on the manufacturer's website or by contacting their technical support team.