STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STL12N60M2
Details bekijken DataSheets

STL12N60M2

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, lighting, and motor control
Characteristics: High voltage capability, low input capacitance, ruggedness, and fast switching speed
Package: TO-220FP
Essence: N-channel enhancement mode power MOSFET
Packaging/Quantity: Available in reels of 250 units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 12A
  • RDS(ON): 0.35Ω
  • Gate Threshold Voltage: 3V
  • Maximum Operating Temperature: 150°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low input and output capacitance for high-speed switching
  • Enhanced ruggedness for reliable performance in harsh conditions
  • Low RDS(ON) for reduced conduction losses
  • Avalanche energy specified

Advantages and Disadvantages

Advantages: - High voltage capability - Fast switching speed - Low input capacitance

Disadvantages: - Higher RDS(ON) compared to some alternative models - Limited maximum operating temperature

Working Principles

The STL12N60M2 operates on the principle of an N-channel enhancement mode power MOSFET, where the gate voltage controls the conductivity between the drain and source terminals. When a sufficient gate-source voltage is applied, the MOSFET enters the ON state, allowing current to flow from the drain to the source.

Detailed Application Field Plans

  1. Power Supplies: Used for high-voltage switching in AC-DC and DC-DC converters.
  2. Lighting: Enables efficient control of LED drivers and ballasts.
  3. Motor Control: Facilitates precise switching in motor drive circuits.

Detailed and Complete Alternative Models

  1. STL9N60M2: Lower voltage rating but similar characteristics
  2. STL15N60M2: Higher voltage rating with comparable specifications
  3. STL12N60M3: Improved thermal performance and lower RDS(ON)

This comprehensive entry provides a detailed insight into the STL12N60M2, covering its product overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word Count: 332

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STL12N60M2 in technische oplossingen

  1. What is the maximum drain-source voltage of the STL12N60M2 MOSFET?

    • The maximum drain-source voltage of the STL12N60M2 MOSFET is 600V.

  2. What is the continuous drain current rating of the STL12N60M2 MOSFET?

    • The continuous drain current rating of the STL12N60M2 MOSFET is 12A.

  3. What is the on-state resistance (RDS(on)) of the STL12N60M2 MOSFET?

    • The on-state resistance (RDS(on)) of the STL12N60M2 MOSFET is typically 0.6 ohms.

  4. Can the STL12N60M2 MOSFET be used in high-frequency switching applications?

    • Yes, the STL12N60M2 MOSFET is suitable for high-frequency switching applications due to its low gate charge and fast switching characteristics.

  5. What are the typical applications of the STL12N60M2 MOSFET?

    • Typical applications of the STL12N60M2 MOSFET include power supplies, motor control, lighting, and industrial equipment.

  6. Does the STL12N60M2 MOSFET require a heat sink for operation?

    • The need for a heat sink depends on the specific application and the power dissipation requirements. In high-power applications, a heat sink may be necessary.

  7. What is the gate-source threshold voltage of the STL12N60M2 MOSFET?

    • The gate-source threshold voltage of the STL12N60M2 MOSFET is typically around 4V.

  8. Is the STL12N60M2 MOSFET suitable for use in automotive electronics?

    • Yes, the STL12N60M2 MOSFET is designed to meet automotive industry standards and can be used in automotive electronics applications.

  9. What are the recommended operating temperature range for the STL12N60M2 MOSFET?

    • The recommended operating temperature range for the STL12N60M2 MOSFET is -55°C to 150°C.

  10. Does the STL12N60M2 MOSFET have built-in protection features?

    • The STL12N60M2 MOSFET includes built-in protection against overcurrent, overtemperature, and short-circuit conditions to enhance reliability in various technical solutions.