STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STF12NK80Z
Details bekijken DataSheets

STF12NK80Z

Introduction

The STF12NK80Z is a power MOSFET belonging to the category of semiconductor devices. It is widely used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Power MOSFET
  • Use: The STF12NK80Z is used as a switching device in power supply, motor control, and other high-power applications.
  • Characteristics: It exhibits low on-state resistance, high switching speed, and low gate charge, making it suitable for high-efficiency power conversion.
  • Package: The STF12NK80Z is available in a TO-220 package, providing robustness and thermal performance.
  • Essence: Its essence lies in providing efficient power management and control in diverse electronic systems.
  • Packaging/Quantity: Typically supplied in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 800V
  • Current Rating: 12A
  • On-State Resistance: 0.35Ω
  • Gate Charge: 30nC
  • Operating Temperature Range: -55°C to 150°C
  • Package Type: TO-220

Detailed Pin Configuration

The STF12NK80Z features a standard TO-220 pin configuration: 1. Source (S) 2. Gate (G) 3. Drain (D)

Functional Features

  • Low On-State Resistance: Enables minimal conduction losses, enhancing efficiency.
  • High Switching Speed: Facilitates rapid switching transitions, reducing power dissipation.
  • Low Gate Charge: Allows for efficient control of the MOSFET, minimizing drive requirements.

Advantages and Disadvantages

Advantages: - High efficiency in power conversion applications - Robust packaging for thermal management - Suitable for high-power and high-frequency operations

Disadvantages: - Sensitive to voltage and current spikes - Requires careful consideration of driving circuitry to prevent damage

Working Principles

The STF12NK80Z operates based on the principles of field-effect transistors, utilizing the electric field at the gate to control the flow of current between the source and drain terminals. When a sufficient voltage is applied to the gate, the MOSFET enters a low-resistance state, allowing current to flow through.

Detailed Application Field Plans

The STF12NK80Z finds extensive use in the following application fields: - Power Supplies: Used in switch-mode power supplies for efficient voltage regulation. - Motor Control: Employed in motor drive circuits for precise speed and torque control. - Inverters: Integrated into inverter designs for renewable energy systems and motor drives.

Detailed and Complete Alternative Models

  1. STF10N80K5: Similar voltage and current ratings with enhanced switching characteristics.
  2. STF15NM60N: Higher current rating and lower on-state resistance for increased power handling.
  3. STF6N80K5: Lower voltage rating with comparable current capacity for specific voltage-limited applications.

In conclusion, the STF12NK80Z power MOSFET offers a balance of performance, efficiency, and reliability, making it a versatile choice for various high-power electronic applications.

Word Count: 497

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STF12NK80Z in technische oplossingen

  1. What is the maximum drain-source voltage rating of STF12NK80Z?

    • The maximum drain-source voltage rating of STF12NK80Z is 800V.

  2. What is the continuous drain current rating of STF12NK80Z?

    • The continuous drain current rating of STF12NK80Z is 12A.

  3. What is the on-state resistance (RDS(on)) of STF12NK80Z?

    • The on-state resistance (RDS(on)) of STF12NK80Z is typically 0.45 ohms.

  4. What is the gate threshold voltage of STF12NK80Z?

    • The gate threshold voltage of STF12NK80Z is typically 3V.

  5. What are the typical applications for STF12NK80Z?

    • STF12NK80Z is commonly used in applications such as switch mode power supplies, motor control, and lighting systems.

  6. Is STF12NK80Z suitable for high-frequency switching applications?

    • Yes, STF12NK80Z is designed for high-frequency switching applications.

  7. Does STF12NK80Z have built-in protection features?

    • STF12NK80Z includes built-in protection features such as thermal shutdown and overcurrent protection.

  8. What is the operating temperature range of STF12NK80Z?

    • The operating temperature range of STF12NK80Z is typically -55°C to 150°C.

  9. Can STF12NK80Z be used in automotive applications?

    • Yes, STF12NK80Z is suitable for use in automotive applications.

  10. What are the recommended mounting techniques for STF12NK80Z?

    • STF12NK80Z can be mounted using through-hole or surface-mount techniques, following the recommended PCB layout guidelines provided in the datasheet.