STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
STD9N60M2
Details bekijken DataSheets

STD9N60M2

Product Overview

  • Category: Power MOSFET
  • Use: Switching and amplification in power electronics applications
  • Characteristics: High voltage, low on-resistance, fast switching speed
  • Package: TO-252 (DPAK)
  • Essence: Efficient power management
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 600V
  • Current Rating: 9A
  • On-Resistance: 1.6Ω
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Fast switching speed for improved efficiency
  • Low on-resistance for reduced power dissipation
  • High voltage rating for versatile applications

Advantages

  • Enhanced power management capabilities
  • Suitable for high voltage applications
  • Low conduction losses

Disadvantages

  • Sensitive to static electricity
  • Requires careful handling during assembly

Working Principles

The STD9N60M2 operates based on the principle of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the device switches on, allowing current to flow through.

Detailed Application Field Plans

  • Switched-mode power supplies
  • Motor control
  • Lighting systems
  • Audio amplifiers
  • Inverters

Detailed and Complete Alternative Models

  • STP9NK60ZFP
  • IRF840
  • FQP30N06L
  • IRL540

Note: The above alternative models are provided as examples and may not be direct substitutes for all applications.

This comprehensive entry provides an in-depth understanding of the STD9N60M2 Power MOSFET, including its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van STD9N60M2 in technische oplossingen

  1. What is the maximum drain-source voltage for STD9N60M2?

    • The maximum drain-source voltage for STD9N60M2 is 600V.

  2. What is the continuous drain current rating of STD9N60M2?

    • The continuous drain current rating of STD9N60M2 is 9A.

  3. What is the on-state resistance (RDS(on)) of STD9N60M2?

    • The on-state resistance (RDS(on)) of STD9N60M2 is typically 1.5 ohms.

  4. Can STD9N60M2 be used in switching power supplies?

    • Yes, STD9N60M2 can be used in switching power supplies due to its high voltage and current ratings.

  5. What are the typical applications of STD9N60M2?

    • Typical applications of STD9N60M2 include motor control, lighting, and power management in industrial and consumer electronics.

  6. Does STD9N60M2 require a heat sink for operation?

    • Depending on the application and operating conditions, STD9N60M2 may require a heat sink for efficient thermal management.

  7. Is STD9N60M2 suitable for high-frequency switching applications?

    • STD9N60M2 is designed for general-purpose switching applications and may not be optimized for high-frequency switching.

  8. What is the gate threshold voltage of STD9N60M2?

    • The gate threshold voltage of STD9N60M2 typically ranges from 2V to 4V.

  9. Can STD9N60M2 be used in automotive electronic systems?

    • STD9N60M2 is not specifically designed for automotive applications and may not meet automotive-grade requirements.

  10. Are there any recommended driver ICs for controlling STD9N60M2?

    • While specific driver ICs may vary based on the application, commonly used MOSFET driver ICs can be employed to control STD9N60M2 effectively.