STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
LD1086DT80
Details bekijken DataSheets

LD1086DT80

Product Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulator
  • Characteristics:
    • High precision
    • Low dropout voltage
    • Adjustable output voltage
  • Package: TO-252 (DPAK)
  • Essence: Linear regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage Range: 1.25V to 18V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 1.3V (typical) at 1A load
  • Line Regulation: 0.2% (typical)
  • Load Regulation: 0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LD1086DT80 has three pins:

  1. Input (VIN): Connects to the input voltage source.
  2. Ground (GND): Connected to the ground reference.
  3. Output (VOUT): Provides the regulated output voltage.

Functional Features

  • High precision voltage regulation.
  • Low dropout voltage ensures efficient operation even with low input-output voltage differentials.
  • Adjustable output voltage allows flexibility in various applications.
  • Overcurrent and thermal protection for enhanced reliability.
  • Fast transient response for stable output voltage during load variations.

Advantages and Disadvantages

Advantages

  • High precision regulation ensures accurate output voltage.
  • Low dropout voltage minimizes power dissipation.
  • Adjustable output voltage provides versatility.
  • Overcurrent and thermal protection enhance reliability.
  • Fast transient response ensures stability during load changes.

Disadvantages

  • Limited maximum output current (up to 1.5A).
  • Requires external components for proper operation.
  • Higher cost compared to non-linear voltage regulators.

Working Principles

The LD1086DT80 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a stable output voltage. The dropout voltage is minimized by using a low saturation voltage pass transistor.

Detailed Application Field Plans

The LD1086DT80 is commonly used in various applications, including:

  1. Power supplies for microcontrollers and digital circuits.
  2. Battery-powered devices requiring stable voltage regulation.
  3. Automotive electronics.
  4. Industrial control systems.
  5. Communication equipment.

Detailed and Complete Alternative Models

  1. LM317: Adjustable positive voltage regulator with similar specifications.
  2. LT1086: Low dropout positive voltage regulator with higher output current capability.
  3. LM1117: Fixed output voltage regulator available in various voltage options.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 320 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LD1086DT80 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of LD1086DT80 in technical solutions:

  1. Q: What is LD1086DT80? A: LD1086DT80 is a voltage regulator IC that provides a fixed output voltage of 3.3V with a maximum output current of 800mA.

  2. Q: What are the typical applications of LD1086DT80? A: LD1086DT80 is commonly used in various electronic devices, such as microcontrollers, sensors, and low-power digital circuits.

  3. Q: How does LD1086DT80 regulate voltage? A: LD1086DT80 uses a linear voltage regulation technique to maintain a constant output voltage regardless of input voltage fluctuations.

  4. Q: What is the input voltage range for LD1086DT80? A: The input voltage range for LD1086DT80 is typically between 4.5V and 20V.

  5. Q: Can LD1086DT80 handle higher input voltages? A: No, LD1086DT80 is not designed to handle input voltages higher than 20V. It may get damaged if exposed to higher voltages.

  6. Q: Is LD1086DT80 suitable for battery-powered applications? A: Yes, LD1086DT80 is suitable for battery-powered applications as it has a low dropout voltage, which allows it to operate efficiently even when the input voltage is close to the output voltage.

  7. Q: Does LD1086DT80 require any external components for operation? A: Yes, LD1086DT80 requires a few external components, such as input and output capacitors, to ensure stability and proper filtering of the voltage.

  8. Q: What is the thermal resistance of LD1086DT80? A: The thermal resistance of LD1086DT80 is typically around 50°C/W, which indicates its ability to dissipate heat.

  9. Q: Can LD1086DT80 handle short-circuit conditions? A: Yes, LD1086DT80 has built-in protection features that allow it to withstand short-circuit conditions without getting damaged.

  10. Q: Is LD1086DT80 available in different package options? A: Yes, LD1086DT80 is available in various package options, such as TO-220 and SOT-223, providing flexibility for different PCB layouts and applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's recommendations for LD1086DT80.