Zie specificaties voor productdetails.
LD1086BDTTR
Product Overview
- Category: Integrated Circuit
- Use: Voltage Regulator
- Characteristics: High current, low dropout voltage, adjustable output voltage
- Package: TO-252 (DPAK)
- Essence: LD1086BDTTR is a voltage regulator IC designed to provide a stable and regulated output voltage for various electronic applications.
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Input Voltage Range: 4.5V to 20V
- Output Voltage Range: 1.25V to 15V
- Output Current: Up to 1.5A
- Dropout Voltage: 1.3V typical at 1A load
- Line Regulation: 0.2% typical
- Load Regulation: 0.4% typical
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The LD1086BDTTR package consists of three pins:
- Input Pin (VIN): Connects to the input voltage source.
- Output Pin (VOUT): Provides the regulated output voltage.
- Ground Pin (GND): Connected to the ground reference.
Functional Features
- High current capability allows it to handle demanding loads.
- Low dropout voltage ensures efficient regulation even with small input-output differentials.
- Adjustable output voltage provides flexibility in various applications.
- Built-in thermal shutdown and current limit protection enhance reliability.
Advantages and Disadvantages
Advantages: - High current handling capacity - Low dropout voltage - Adjustable output voltage - Thermal shutdown and current limit protection
Disadvantages: - Limited output current compared to some other voltage regulators - Requires external components for stability and filtering
Working Principles
The LD1086BDTTR is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, adjusting the pass transistor's resistance to maintain a stable output voltage.
Detailed Application Field Plans
The LD1086BDTTR can be used in various applications where a stable and regulated voltage supply is required. Some common application fields include:
- Power supplies for microcontrollers and digital circuits.
- Battery charging circuits.
- Automotive electronics.
- Industrial control systems.
- Audio amplifiers.
Detailed and Complete Alternative Models
- LM317: Adjustable voltage regulator with similar characteristics.
- LT1086: Low dropout voltage regulator with higher current capability.
- LM1117: Fixed voltage regulator available in various output voltages.
These alternative models offer similar functionality and can be considered as substitutes for the LD1086BDTTR depending on specific requirements.
Word count: 314 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LD1086BDTTR in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of LD1086BDTTR in technical solutions:
Q: What is LD1086BDTTR? A: LD1086BDTTR is a voltage regulator IC commonly used in electronic circuits to regulate and stabilize voltage levels.
Q: What is the input voltage range for LD1086BDTTR? A: The input voltage range for LD1086BDTTR is typically between 4.5V and 20V.
Q: What is the output voltage range of LD1086BDTTR? A: The output voltage range of LD1086BDTTR can be adjusted from 1.25V to 15V using external resistors.
Q: What is the maximum output current that LD1086BDTTR can handle? A: LD1086BDTTR can handle a maximum output current of 1.5A.
Q: Is LD1086BDTTR suitable for both linear and switching power supply applications? A: Yes, LD1086BDTTR can be used in both linear and switching power supply applications.
Q: Does LD1086BDTTR require any external components for operation? A: Yes, LD1086BDTTR requires external capacitors for stability and noise reduction.
Q: Can LD1086BDTTR tolerate high temperatures? A: Yes, LD1086BDTTR has a wide operating temperature range of -40°C to +125°C.
Q: Is LD1086BDTTR protected against overcurrent and thermal overload? A: Yes, LD1086BDTTR has built-in protection features like overcurrent and thermal shutdown.
Q: Can LD1086BDTTR be used in battery-powered applications? A: Yes, LD1086BDTTR is suitable for battery-powered applications due to its low dropout voltage.
Q: What are some typical applications of LD1086BDTTR? A: LD1086BDTTR is commonly used in various technical solutions such as power supplies, battery chargers, automotive electronics, and industrial control systems.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.