Zie specificaties voor productdetails.
LD1084D2T-R
Product Overview
Category
LD1084D2T-R belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- LD1084D2T-R is a low-dropout (LDO) voltage regulator.
- It has a high output voltage accuracy.
- It offers a low dropout voltage, ensuring efficient power conversion.
- The device operates within a wide input voltage range.
- It provides excellent line and load regulation.
- LD1084D2T-R is designed to handle high current loads.
Package
The LD1084D2T-R comes in a TO-220 package.
Essence
The essence of LD1084D2T-R is to provide a stable and regulated voltage supply for electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.
Specifications
- Input Voltage Range: 4.5V to 20V
- Output Voltage Range: 1.25V to 18V
- Dropout Voltage: 1.3V (typical)
- Maximum Output Current: 5A
- Line Regulation: ±0.2% (typical)
- Load Regulation: ±0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The LD1084D2T-R has three pins:
- Input (VIN): This pin is connected to the input voltage source.
- Output (VOUT): This pin provides the regulated output voltage.
- Ground (GND): This pin is connected to the ground reference.
Functional Features
- Low Dropout Voltage: LD1084D2T-R has a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the output voltage.
- Current Limit Protection: The device incorporates current limit protection, safeguarding against excessive current flow.
- Thermal Overload Protection: LD1084D2T-R includes thermal overload protection, preventing damage due to excessive heat.
- Fast Transient Response: The regulator responds quickly to changes in load conditions, maintaining a stable output voltage.
Advantages and Disadvantages
Advantages
- High output voltage accuracy
- Low dropout voltage
- Wide input voltage range
- Excellent line and load regulation
- Handles high current loads effectively
Disadvantages
- Requires external capacitors for stability
- Higher cost compared to standard linear regulators
Working Principles
LD1084D2T-R operates based on the principle of regulating voltage through a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite variations in the input voltage or load conditions.
Detailed Application Field Plans
LD1084D2T-R finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - Audio amplifiers - Industrial control systems - Automotive electronics - Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to LD1084D2T-R are: - LM317 - LT1084 - ADP3339 - TPS7A47
These models offer similar functionality and can be used as substitutes depending on specific requirements and design considerations.
Word count: 443 words
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LD1084D2T-R in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of LD1084D2T-R in technical solutions:
Q: What is LD1084D2T-R? A: LD1084D2T-R is a voltage regulator IC that provides a fixed output voltage for various electronic applications.
Q: What is the input voltage range supported by LD1084D2T-R? A: The input voltage range supported by LD1084D2T-R is typically between 4.5V and 20V.
Q: What is the output voltage provided by LD1084D2T-R? A: LD1084D2T-R can provide a fixed output voltage of 1.8V, 2.5V, 3.3V, or 5V, depending on the specific variant.
Q: What is the maximum output current LD1084D2T-R can handle? A: LD1084D2T-R can handle a maximum output current of up to 5A, making it suitable for powering a wide range of devices.
Q: Is LD1084D2T-R a linear or switching regulator? A: LD1084D2T-R is a linear regulator, which means it regulates the output voltage by dissipating excess energy as heat.
Q: Can LD1084D2T-R be used in automotive applications? A: Yes, LD1084D2T-R is designed to meet the requirements of automotive applications and can operate in a wide temperature range.
Q: Does LD1084D2T-R require any external components for operation? A: Yes, LD1084D2T-R requires a few external components such as input/output capacitors and resistors for stability and filtering.
Q: What is the dropout voltage of LD1084D2T-R? A: The dropout voltage of LD1084D2T-R is typically around 1.3V, which means the input voltage must be at least 1.3V higher than the desired output voltage.
Q: Can LD1084D2T-R handle short-circuit conditions? A: Yes, LD1084D2T-R has built-in protection features that allow it to withstand short-circuit conditions without damage.
Q: Are there any recommended heat dissipation considerations for LD1084D2T-R? A: Yes, LD1084D2T-R can generate significant heat during operation, so it is recommended to use a heatsink or ensure proper ventilation to prevent overheating.
Please note that these answers are general and may vary depending on the specific application and usage scenario. It's always advisable to refer to the datasheet and consult the manufacturer for detailed information.