STMicroelectronics
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
L4973D3.3
Details bekijken DataSheets

L4973D3.3

Product Overview

Category

L4973D3.3 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Adjustable output voltage
  • Overcurrent and thermal protection
  • Wide input voltage range

Package

L4973D3.3 is available in a TO-220 package.

Essence

The essence of L4973D3.3 lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

L4973D3.3 is typically sold in reels or tubes, with quantities varying depending on the supplier.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 1.25V to 35V
  • Output Current: Up to 3A
  • Dropout Voltage: 1.2V (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

L4973D3.3 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. ADJ: Adjustable pin for setting the output voltage

Functional Features

  • High Efficiency: L4973D3.3 offers high efficiency, minimizing power loss during voltage regulation.
  • Overcurrent and Thermal Protection: The device incorporates overcurrent and thermal protection mechanisms to safeguard against potential damage.
  • Adjustable Output Voltage: The adjustable pin allows users to set the desired output voltage within the specified range.
  • Wide Input Voltage Range: L4973D3.3 can handle a wide range of input voltages, making it versatile for different applications.

Advantages and Disadvantages

Advantages

  • High efficiency results in reduced power dissipation.
  • Overcurrent and thermal protection ensure device safety.
  • Adjustable output voltage allows for customization.
  • Wide input voltage range enhances versatility.

Disadvantages

  • Dropout voltage of 1.2V may limit certain low-voltage applications.
  • The TO-220 package may require additional space on the circuit board.

Working Principles

L4973D3.3 operates as a linear voltage regulator. It regulates the output voltage by adjusting the resistance between the input and output pins, maintaining a stable voltage regardless of variations in the input voltage or load conditions. The device utilizes internal feedback mechanisms to continuously monitor and adjust the output voltage.

Detailed Application Field Plans

L4973D3.3 finds application in various electronic systems, including but not limited to: - Power supplies - Battery chargers - Industrial control systems - Automotive electronics - Audio amplifiers

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to L4973D3.3 include: - LM317 - LT1083 - LM7805 - LM1117

These alternatives can be considered based on specific requirements and compatibility with the intended application.

In conclusion, L4973D3.3 is a versatile voltage regulator offering high efficiency, adjustable output voltage, and robust protection features. Its wide range of applications and availability of alternative models make it a popular choice in the field of electronic circuit design.

Word count: 411

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van L4973D3.3 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of L4973D3.3 in technical solutions:

  1. Q: What is L4973D3.3? A: L4973D3.3 is a voltage regulator IC that provides a fixed output voltage of 3.3V.

  2. Q: What is the maximum input voltage for L4973D3.3? A: The maximum input voltage for L4973D3.3 is typically around 55V.

  3. Q: How much current can L4973D3.3 handle? A: L4973D3.3 can handle a maximum output current of up to 3A.

  4. Q: Can L4973D3.3 be used in both step-up and step-down applications? A: No, L4973D3.3 is a step-down (buck) voltage regulator and can only be used for stepping down the input voltage.

  5. Q: Does L4973D3.3 require any external components for operation? A: Yes, L4973D3.3 requires external capacitors and an inductor for proper operation.

  6. Q: What is the efficiency of L4973D3.3? A: The efficiency of L4973D3.3 can reach up to 90% depending on the input and output conditions.

  7. Q: Can L4973D3.3 handle high temperatures? A: Yes, L4973D3.3 has built-in thermal protection and can operate at temperatures up to 150°C.

  8. Q: Is L4973D3.3 suitable for battery-powered applications? A: Yes, L4973D3.3 is suitable for battery-powered applications as it has a low dropout voltage.

  9. Q: Can L4973D3.3 be used in automotive applications? A: Yes, L4973D3.3 is designed to meet automotive specifications and can be used in automotive applications.

  10. Q: What are the typical applications of L4973D3.3? A: L4973D3.3 is commonly used in various electronic devices such as routers, set-top boxes, industrial equipment, and power supplies.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.