Zie specificaties voor productdetails.
L4931CDT33-TR
Product Overview
Category
L4931CDT33-TR belongs to the category of voltage regulators.
Use
It is commonly used to regulate voltage in electronic circuits.
Characteristics
- Low dropout voltage
- High output current capability
- Excellent line and load regulation
- Thermal shutdown protection
- Short-circuit current limiting
Package
L4931CDT33-TR is available in a surface mount package.
Essence
The essence of L4931CDT33-TR lies in its ability to provide stable and regulated voltage for various electronic applications.
Packaging/Quantity
This product is typically packaged in reels and comes in quantities of 2500 units per reel.
Specifications
- Input Voltage Range: 4.2V to 20V
- Output Voltage: 3.3V
- Output Current: Up to 100mA
- Dropout Voltage: 0.6V (typical)
- Line Regulation: ±0.2% (typical)
- Load Regulation: ±0.4% (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
L4931CDT33-TR has three pins:
- VIN (Input Voltage): Connects to the input voltage source.
- VOUT (Output Voltage): Provides the regulated output voltage.
- GND (Ground): Common ground reference for the circuit.
Functional Features
- Low dropout voltage ensures efficient power conversion.
- High output current capability allows for powering various components.
- Excellent line and load regulation maintain stable output voltage.
- Thermal shutdown protection prevents damage due to excessive heat.
- Short-circuit current limiting protects the device from overcurrent conditions.
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage.
- Wide input voltage range.
- Compact surface mount package.
- Thermal shutdown protection for added safety.
Disadvantages
- Limited output current capability (up to 100mA).
- Dropout voltage of 0.6V may not be suitable for low-power applications.
Working Principles
L4931CDT33-TR operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The device compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
L4931CDT33-TR finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Microcontrollers - Sensors - Communication modules - Audio amplifiers
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to L4931CDT33-TR are: - LM1117-3.3 - MCP1702-3302E/TO - TS2937CP-3.3
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, L4931CDT33-TR is a voltage regulator with excellent characteristics such as low dropout voltage, high output current capability, and thermal shutdown protection. It finds applications in various electronic devices and circuits, providing stable and regulated voltage.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van L4931CDT33-TR in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of L4931CDT33-TR in technical solutions:
Q1: What is the L4931CDT33-TR? A1: The L4931CDT33-TR is a low-dropout voltage regulator IC that provides a fixed output voltage of 3.3V.
Q2: What is the maximum input voltage for the L4931CDT33-TR? A2: The maximum input voltage for the L4931CDT33-TR is 20V.
Q3: What is the dropout voltage of the L4931CDT33-TR? A3: The dropout voltage of the L4931CDT33-TR is typically around 0.4V at a load current of 250mA.
Q4: Can the L4931CDT33-TR handle high currents? A4: No, the L4931CDT33-TR is designed for low to moderate current applications with a maximum output current of 250mA.
Q5: Is the L4931CDT33-TR suitable for battery-powered applications? A5: Yes, the L4931CDT33-TR is well-suited for battery-powered applications due to its low quiescent current and low dropout voltage.
Q6: Does the L4931CDT33-TR require any external components for operation? A6: Yes, the L4931CDT33-TR requires an input capacitor and an output capacitor for stability and proper operation.
Q7: Can the L4931CDT33-TR tolerate short-circuits or overloads? A7: No, the L4931CDT33-TR does not have built-in protection against short-circuits or overloads. External protection circuitry may be required.
Q8: Can the L4931CDT33-TR operate in a wide temperature range? A8: Yes, the L4931CDT33-TR is designed to operate in a temperature range of -40°C to +125°C.
Q9: Is the L4931CDT33-TR available in different package options? A9: Yes, the L4931CDT33-TR is available in a SOT-223 package.
Q10: What are some typical applications for the L4931CDT33-TR? A10: The L4931CDT33-TR can be used in various applications such as battery-powered devices, microcontrollers, sensors, and other low-power electronic systems that require a stable 3.3V power supply.