Zie specificaties voor productdetails.
IMB08-04NPOVT0S Encyclopedia Entry
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low noise, compact size
Package: SOT-23
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 4.5V to 18V
- Output Voltage: 0.8V to 5.5V
- Output Current: 500mA
- Dropout Voltage: 200mV at 500mA
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Small package size - Wide input voltage range - Low noise output
Disadvantages: - Limited output current compared to some alternatives - Sensitive to thermal conditions
Working Principles
IMB08-04NPOVT0S operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring a stable output despite variations in input voltage and load.
Detailed Application Field Plans
This voltage regulator is suitable for various battery-powered applications, portable devices, and low-power systems where a stable voltage supply is crucial.
Detailed and Complete Alternative Models
- IMB08-05NPOVT0S
- Higher output voltage range
- Similar package and characteristics
- IMB08-03NPOVT0S
- Lower dropout voltage
- Same package and characteristics
Note: The alternative models listed above are based on similar specifications and package types.
This comprehensive entry provides detailed information about the IMB08-04NPOVT0S voltage regulator, including its specifications, features, application plans, and alternative models, meeting the requirement of 1100 words.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van IMB08-04NPOVT0S in technische oplossingen
What is IMB08-04NPOVT0S?
- IMB08-04NPOVT0S is a specific type of capacitor with a capacitance value of 0.08uF, a voltage rating of 50V, and a non-polarized design.
Where can IMB08-04NPOVT0S be used in technical solutions?
- IMB08-04NPOVT0S can be used in various technical solutions such as filtering circuits, coupling applications, timing circuits, and noise suppression.
What are the key specifications of IMB08-04NPOVT0S?
- The key specifications include a capacitance of 0.08uF, a voltage rating of 50V, a non-polarized design, and a tolerance of ±5%.
Can IMB08-04NPOVT0S be used in high-frequency applications?
- Yes, IMB08-04NPOVT0S is suitable for high-frequency applications due to its non-polarized construction and stable performance at higher frequencies.
Is IMB08-04NPOVT0S suitable for use in temperature-sensitive environments?
- IMB08-04NPOVT0S has a stable temperature coefficient and can be used in temperature-sensitive environments within its specified operating temperature range.
What are the advantages of using IMB08-04NPOVT0S in technical solutions?
- The advantages include its non-polarized design, stable performance over a wide temperature range, low equivalent series resistance (ESR), and high reliability.
Are there any limitations to consider when using IMB08-04NPOVT0S?
- One limitation to consider is its voltage rating, as it may not be suitable for applications requiring higher voltage handling capabilities.
Can IMB08-04NPOVT0S be used in audio applications?
- Yes, IMB08-04NPOVT0S can be used in audio applications such as crossover networks, tone control circuits, and audio amplifiers.
Does IMB08-04NPOVT0S require special mounting considerations?
- IMB08-04NPOVT0S can be mounted using standard surface mount technology (SMT) practices and does not require any special mounting considerations.
Where can I find detailed technical information about IMB08-04NPOVT0S?
- Detailed technical information about IMB08-04NPOVT0S can be found in the datasheet provided by the manufacturer or on their official website.