Rohm Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MPSA06T93

MPSA06T93

Product Overview

Category

The MPSA06T93 belongs to the category of bipolar transistors.

Use

It is commonly used as a general-purpose amplifier or switch in electronic circuits.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise

Package

The MPSA06T93 is typically available in a TO-92 package.

Essence

This transistor is essential for amplifying and switching electronic signals in various applications.

Packaging/Quantity

It is usually sold in reels or tubes containing multiple units.

Specifications

  • Collector-Base Voltage (VCBO): 80V
  • Collector-Emitter Voltage (VCEO): 80V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MPSA06T93 has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain allows for small base current requirements.
  • Low noise makes it suitable for audio applications.
  • Wide operating temperature range enables use in various environments.

Advantages

  • Versatile application in amplification and switching circuits.
  • Low power dissipation minimizes heat generation.

Disadvantages

  • Limited maximum collector current compared to some other transistors.
  • Relatively low voltage ratings compared to high-power transistors.

Working Principles

The MPSA06T93 operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.

Detailed Application Field Plans

The MPSA06T93 is widely used in the following applications: - Audio amplifiers - Signal amplification in sensor circuits - Switching circuits in electronic devices

Detailed and Complete Alternative Models

Some alternative models to the MPSA06T93 include: - 2N3904 - BC547 - 2N2222

In conclusion, the MPSA06T93 is a versatile bipolar transistor with applications in amplification and switching circuits across various electronic devices and systems.

Word count: 315

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MPSA06T93 in technische oplossingen

  1. What is the MPSA06T93 transistor used for?

    • The MPSA06T93 is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications.

  2. What are the key specifications of the MPSA06T93 transistor?

    • The MPSA06T93 has a maximum collector current (Ic) of 500mA, a maximum collector-base voltage (Vcb) of 80V, and a maximum power dissipation (Pd) of 625mW.

  3. How can I use the MPSA06T93 in an amplifier circuit?

    • The MPSA06T93 can be used as a small-signal amplifier in audio or other low-power applications by biasing it properly and connecting it in the appropriate configuration.

  4. Can the MPSA06T93 be used for switching applications?

    • Yes, the MPSA06T93 can be used for low-power switching applications due to its moderate current and voltage ratings.

  5. What are some common circuit configurations for the MPSA06T93?

    • Common configurations include common emitter, common base, and common collector configurations, depending on the specific application requirements.

  6. Are there any important considerations when using the MPSA06T93 in a circuit?

    • It's important to consider the biasing, operating conditions, and load requirements to ensure proper performance and reliability.

  7. What are the typical gain characteristics of the MPSA06T93?

    • The MPSA06T93 typically has a current gain (hfe) ranging from 100 to 300, depending on the operating conditions.

  8. Can the MPSA06T93 be used in high-frequency applications?

    • While the MPSA06T93 is not specifically designed for high-frequency applications, it can still be used in certain low to moderate frequency circuits.

  9. What are the temperature limitations of the MPSA06T93?

    • The MPSA06T93 is typically rated for operation within a temperature range of -55°C to 150°C, but actual performance may vary under extreme conditions.

  10. Where can I find detailed application notes and reference designs for the MPSA06T93?

    • Detailed application notes and reference designs for the MPSA06T93 can be found in the manufacturer's datasheet, technical documents, and online resources related to transistor applications.