Rohm Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
BR24G16FJ-3GTE2
Details bekijken DataSheets

BR24G16FJ-3GTE2

Introduction

The BR24G16FJ-3GTE2 is a non-volatile memory product belonging to the category of serial EEPROMs. This device is widely used in various electronic applications due to its reliable performance and versatile characteristics.

Basic Information Overview

  • Category: Serial EEPROM
  • Use: Non-volatile memory storage
  • Characteristics: High reliability, low power consumption, small form factor
  • Package: SOP-8 (Small Outline Package)
  • Essence: Data storage and retrieval
  • Packaging/Quantity: Typically supplied in reels or tubes, quantity varies based on manufacturer's specifications

Specifications

  • Memory Capacity: 16 Kbits
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The BR24G16FJ-3GTE2 features an SOP-8 package with the following pin configuration: 1. A0: Address Input 2. A1: Address Input 3. A2: Address Input 4. VSS: Ground 5. SDA: Serial Data 6. SCL: Serial Clock 7. WP: Write Protect 8. VCC: Power Supply

Functional Features

  • High Reliability: Offers dependable data retention and endurance.
  • Low Power Consumption: Ideal for battery-powered devices.
  • Small Form Factor: Space-efficient design suitable for compact applications.

Advantages and Disadvantages

Advantages: - Reliable data storage - Low power consumption - Compact form factor

Disadvantages: - Limited storage capacity compared to other memory technologies - Slower data transfer rates compared to some alternatives

Working Principles

The BR24G16FJ-3GTE2 operates based on the I2C protocol, allowing for simple interfacing with microcontrollers and other devices. It stores and retrieves data through the serial data (SDA) and serial clock (SCL) lines, providing non-volatile memory capabilities for various electronic systems.

Detailed Application Field Plans

The BR24G16FJ-3GTE2 finds extensive use in applications such as: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - IoT (Internet of Things) devices

Detailed and Complete Alternative Models

  • AT24C16 (by Microchip Technology)
  • 24AA16 (by Microchip Technology)
  • CAT24C16 (by ON Semiconductor)
  • M24C16 (by STMicroelectronics)

In conclusion, the BR24G16FJ-3GTE2 serial EEPROM offers reliable non-volatile memory storage with low power consumption and a compact form factor, making it suitable for a wide range of electronic applications.

Word count: 410

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van BR24G16FJ-3GTE2 in technische oplossingen

  1. What is the BR24G16FJ-3GTE2?

    • The BR24G16FJ-3GTE2 is a 16Kbit serial EEPROM with a wide operating voltage range and low power consumption, suitable for various technical solutions.

  2. What are the key features of the BR24G16FJ-3GTE2?

    • The key features include a wide voltage range (1.7V to 5.5V), I2C bus interface, low current consumption, and high reliability.

  3. How can the BR24G16FJ-3GTE2 be used in IoT applications?

    • It can be used for storing configuration data, device parameters, and other critical information in IoT devices.

  4. What are the typical operating conditions for the BR24G16FJ-3GTE2?

    • The typical operating temperature range is -40°C to 85°C, making it suitable for a wide range of environments.

  5. Can the BR24G16FJ-3GTE2 be used in automotive applications?

    • Yes, it is AEC-Q100 qualified and suitable for use in automotive electronics.

  6. What are the advantages of using the BR24G16FJ-3GTE2 in industrial control systems?

    • Its wide voltage range and high reliability make it well-suited for industrial control systems operating in harsh environments.

  7. How does the BR24G16FJ-3GTE2 ensure data integrity?

    • It incorporates built-in error checking and correction (ECC) functionality to ensure data integrity.

  8. Can the BR24G16FJ-3GTE2 be cascaded for larger memory requirements?

    • Yes, it supports up to eight devices on the same bus, allowing for easy expansion of memory capacity.

  9. What are the typical applications for the BR24G16FJ-3GTE2 in consumer electronics?

    • It can be used for storing user settings, firmware updates, and other non-volatile data in consumer electronic devices.

  10. Are there any specific design considerations when integrating the BR24G16FJ-3GTE2 into a technical solution?

    • Designers should consider the I2C bus protocol, addressing scheme, and power supply decoupling to ensure proper operation of the device within the system.