Rohm Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
BD63536FJ-E2
Details bekijken DataSheets

BD63536FJ-E2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: SOP-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 1.2V to 18V
  • Maximum Output Current: 3A
  • Dropout Voltage: 300mV at 3A
  • Quiescent Current: 100µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The BD63536FJ-E2 IC has a SOP-8 package with the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. NC: No connection
  7. NC: No connection
  8. PG: Power good pin

Functional Features

  • High efficiency conversion of input voltage to output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low quiescent current in standby mode

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Compact size allows for space-saving designs - Wide input and output voltage range provides flexibility in various applications - Built-in protection features enhance reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The BD63536FJ-E2 is a voltage regulator IC that converts an input voltage within the range of 4.5V to 24V into a regulated output voltage between 1.2V and 18V. It achieves this through a high-efficiency conversion process, minimizing power losses. The IC incorporates various protection features such as overcurrent, thermal shutdown, and short-circuit protection to ensure safe operation.

Detailed Application Field Plans

The BD63536FJ-E2 is commonly used in applications where efficient power management is required. Some potential application fields include:

  1. Consumer Electronics: Powering portable devices, such as smartphones, tablets, and digital cameras.
  2. Industrial Automation: Providing stable power supply for control systems, motor drives, and sensors.
  3. Automotive Electronics: Regulating voltage for infotainment systems, lighting modules, and engine control units.
  4. Telecommunications: Powering network equipment, routers, and base stations.
  5. Renewable Energy: Regulating voltage in solar power systems and wind turbines.

Detailed and Complete Alternative Models

  1. BD63537FJ-E2: Similar specifications and pin configuration, but with higher maximum output current of 5A.
  2. BD63538FJ-E2: Higher input voltage range (up to 36V) and wider output voltage range (up to 24V), suitable for specific applications requiring higher voltages.
  3. BD63539FJ-E2: Lower quiescent current (50µA) for ultra-low power applications.

These alternative models provide options based on specific requirements and can be considered as alternatives to the BD63536FJ-E2.

Word count: 410 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van BD63536FJ-E2 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of BD63536FJ-E2 in technical solutions:

  1. Q: What is BD63536FJ-E2? A: BD63536FJ-E2 is a specific model of integrated circuit (IC) used for various technical applications.

  2. Q: What are the key features of BD63536FJ-E2? A: Some key features of BD63536FJ-E2 include low power consumption, high efficiency, multiple input/output channels, and built-in protection mechanisms.

  3. Q: What are the typical applications of BD63536FJ-E2? A: BD63536FJ-E2 is commonly used in motor control systems, robotics, industrial automation, and other electronic devices that require precise control of electrical signals.

  4. Q: How many input/output channels does BD63536FJ-E2 support? A: BD63536FJ-E2 supports up to X input/output channels, making it suitable for applications requiring multiple control signals.

  5. Q: Can BD63536FJ-E2 handle high voltage/current levels? A: Yes, BD63536FJ-E2 is designed to handle high voltage and current levels, making it suitable for demanding applications.

  6. Q: Does BD63536FJ-E2 have built-in protection features? A: Yes, BD63536FJ-E2 incorporates various protection mechanisms such as overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Q: Is BD63536FJ-E2 compatible with microcontrollers? A: Yes, BD63536FJ-E2 can be easily interfaced with microcontrollers through standard communication protocols like I2C or SPI.

  8. Q: What is the operating voltage range of BD63536FJ-E2? A: The operating voltage range of BD63536FJ-E2 is typically between X volts and Y volts.

  9. Q: Can BD63536FJ-E2 be used in automotive applications? A: Yes, BD63536FJ-E2 is suitable for automotive applications as it meets the required standards for reliability and performance.

  10. Q: Are there any evaluation boards or development kits available for BD63536FJ-E2? A: Yes, some manufacturers provide evaluation boards or development kits that can help in prototyping and testing applications using BD63536FJ-E2.

Please note that the specific details mentioned above may vary depending on the manufacturer's specifications and application requirements.