DZ2S130M0L Product Overview

Introduction

The DZ2S130M0L belongs to the category of semiconductor devices and is commonly used as a voltage regulator in electronic circuits. This component possesses specific characteristics, packaging, and quantity that make it suitable for various applications.

Basic Information Overview

Category: Semiconductor device
Use: Voltage regulator in electronic circuits
Characteristics: High precision, low dropout voltage, low quiescent current
Package: SOT-23
Essence: Regulates voltage to ensure stable operation of electronic devices
Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

Input Voltage Range: 2.5V to 6.5V
Output Voltage: 1.8V
Maximum Output Current: 300mA
Dropout Voltage: 190mV at 100mA
Quiescent Current: 75µA

Detailed Pin Configuration

The DZ2S130M0L has three pins: 1. Pin 1 (GND): Connected to ground 2. Pin 2 (VOUT): Output voltage 3. Pin 3 (VIN): Input voltage

Functional Features

Voltage Regulation: Maintains a constant output voltage despite fluctuations in input voltage or load variations.
Low Dropout: Operates with minimal voltage drop between input and output.
Low Quiescent Current: Consumes minimal current when in standby mode.

Advantages and Disadvantages

Advantages

High precision regulation
Low dropout voltage
Low quiescent current
Small form factor

Disadvantages

Limited maximum output current
Restricted input voltage range

Working Principles

The DZ2S130M0L utilizes a feedback control mechanism to compare the output voltage with a reference voltage and adjusts the pass transistor to maintain a stable output voltage.

Detailed Application Field Plans

The DZ2S130M0L is widely used in portable electronic devices, battery-powered systems, and low-power applications where maintaining a stable voltage supply is critical.

Detailed and Complete Alternative Models

DZ2S180M0L: Higher output voltage variant
DZ2S050M0L: Lower output voltage variant
DZ2S300M0L: Higher output current variant

In conclusion, the DZ2S130M0L serves as a crucial component in various electronic circuits, providing precise voltage regulation and ensuring the stable operation of electronic devices.

[Word Count: 366]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van DZ2S130M0L in technische oplossingen

What is DZ2S130M0L?
- DZ2S130M0L is a specific model of diode used in technical solutions, known for its high efficiency and reliability.
What are the key features of DZ2S130M0L?
- The key features include low forward voltage, high surge capability, and fast switching speed, making it suitable for various technical applications.
In what technical solutions is DZ2S130M0L commonly used?
- DZ2S130M0L is commonly used in power supplies, voltage regulation circuits, and electronic equipment where efficient power management is crucial.
What are the operating conditions for DZ2S130M0L?
- The operating conditions typically include a maximum forward current, reverse voltage, and temperature range, which should be carefully adhered to for optimal performance.
How does DZ2S130M0L compare to other diode models?
- DZ2S130M0L stands out for its low forward voltage drop and high surge capability compared to many other diode models, making it a preferred choice in certain technical solutions.
What are the potential applications where DZ2S130M0L may not be suitable?
- DZ2S130M0L may not be suitable for applications requiring extremely high current or ultra-low forward voltage drop, as there are specialized diodes designed for such purposes.
Are there any recommended circuit configurations when using DZ2S130M0L?
- It is advisable to follow the manufacturer's recommended circuit configurations and layout guidelines to ensure proper functionality and reliability of DZ2S130M0L in technical solutions.
What are the typical failure modes of DZ2S130M0L?
- Common failure modes may include thermal overstress, reverse voltage breakdown, and excessive current, highlighting the importance of proper heat dissipation and voltage/current protection measures.
Can DZ2S130M0L be used in automotive applications?
- Yes, DZ2S130M0L can be used in automotive applications, provided it meets the necessary automotive-grade standards and specifications.
Where can I find detailed technical specifications and application notes for DZ2S130M0L?
- Detailed technical specifications and application notes for DZ2S130M0L can be found on the manufacturer's website or in the product datasheet, providing comprehensive guidance for its application in technical solutions.