ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
UC3842BVD1R2G
Details bekijken DataSheets

UC3842BVD1R2G

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Mode PWM Controller
  • Characteristics: High-performance, low-power, fixed-frequency current-mode control IC
  • Package: SOIC-8
  • Essence: The UC3842BVD1R2G is a voltage mode PWM controller designed for use in various power supply applications.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 7.6V to 30V
  • Output Voltage Range: 0V to 5.1V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: 50kHz to 500kHz
  • Maximum Duty Cycle: 100%
  • Output Current: 200mA

Pin Configuration

The UC3842BVD1R2G has the following pin configuration:

  1. COMP: Compensation pin
  2. CS: Current sense input pin
  3. VFB: Feedback voltage input pin
  4. GND: Ground pin
  5. RT/CT: Timing resistor/capacitor connection pin
  6. OUT: Output pin
  7. VCC: Supply voltage input pin
  8. SYNC: Synchronization input pin

Functional Features

  • Voltage mode control with pulse-width modulation (PWM)
  • Current-mode control for improved line and load regulation
  • Internal oscillator with frequency range adjustment
  • Soft-start function for controlled startup
  • Overcurrent protection with adjustable threshold
  • Under-voltage lockout (UVLO) protection
  • Error amplifier with high gain and bandwidth

Advantages and Disadvantages

Advantages

  • High-performance and low-power consumption
  • Wide input voltage range allows for versatile applications
  • Excellent line and load regulation
  • Adjustable switching frequency for optimization
  • Comprehensive protection features ensure system reliability

Disadvantages

  • Limited output current capability (200mA)
  • Requires external components for operation
  • Not suitable for high-power applications

Working Principles

The UC3842BVD1R2G operates based on the voltage mode control technique. It compares the feedback voltage (VFB) with a reference voltage to generate an error signal. This error signal is then amplified and used to control the duty cycle of the PWM signal, which regulates the output voltage.

By utilizing current-mode control, the IC provides improved line and load regulation. The current sense input (CS) monitors the inductor current and adjusts the duty cycle accordingly, ensuring stable and efficient power delivery.

The internal oscillator generates a sawtooth waveform that determines the switching frequency. This frequency can be adjusted using external timing components connected to the RT/CT pin.

Detailed Application Field Plans

The UC3842BVD1R2G finds application in various power supply designs, including:

  1. Switching Mode Power Supplies (SMPS)
  2. DC-DC Converters
  3. LED Drivers
  4. Battery Chargers
  5. Offline Power Supplies

Its versatility and performance make it suitable for both consumer electronics and industrial applications.

Detailed and Complete Alternative Models

  1. UC3842AN: DIP-8 package, similar specifications
  2. UC3843BVD1R2G: SOIC-8 package, higher output current capability
  3. UC3844BVD1R2G: SOIC-8 package, wider input voltage range
  4. UC3845BVD1R2G: SOIC-8 package, additional features like adjustable dead-time

These alternative models offer similar functionality and can be considered as substitutes depending on specific requirements.

In conclusion, the UC3842BVD1R2G is a high-performance voltage mode PWM controller IC designed for power supply applications. Its features, specifications, and versatility make it a reliable choice for various designs in the field of power electronics.

Word count: 511

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van UC3842BVD1R2G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of UC3842BVD1R2G in technical solutions:

Q1: What is UC3842BVD1R2G? A1: UC3842BVD1R2G is a high-performance current-mode PWM controller used in various power supply applications.

Q2: What are the key features of UC3842BVD1R2G? A2: Some key features include adjustable frequency, soft-start capability, cycle-by-cycle current limiting, and built-in leading-edge blanking.

Q3: What is the typical operating voltage range for UC3842BVD1R2G? A3: The typical operating voltage range is between 8V and 30V.

Q4: How does UC3842BVD1R2G regulate output voltage? A4: UC3842BVD1R2G uses a feedback loop to regulate the output voltage by adjusting the duty cycle of the PWM signal.

Q5: Can UC3842BVD1R2G be used in both buck and boost converter topologies? A5: Yes, UC3842BVD1R2G can be used in both buck and boost converter topologies.

Q6: What is the maximum switching frequency supported by UC3842BVD1R2G? A6: The maximum switching frequency supported is typically around 500kHz.

Q7: Does UC3842BVD1R2G have overvoltage protection? A7: No, UC3842BVD1R2G does not have built-in overvoltage protection. External circuitry may be required for this purpose.

Q8: Can UC3842BVD1R2G drive MOSFETs directly? A8: No, UC3842BVD1R2G requires an external driver to drive the MOSFETs.

Q9: What is the maximum duty cycle supported by UC3842BVD1R2G? A9: The maximum duty cycle supported is typically around 50%.

Q10: Is UC3842BVD1R2G suitable for high-power applications? A10: UC3842BVD1R2G is more commonly used in low to medium power applications. For high-power applications, a higher-rated controller may be more appropriate.

Please note that these answers are general and may vary depending on specific application requirements.