Zie specificaties voor productdetails.
SZBZX84C33ET3G
Introduction
The SZBZX84C33ET3G is a voltage regulator belonging to the category of integrated circuits. It is commonly used to regulate voltage in electronic circuits, providing a stable output voltage despite fluctuations in input voltage or load conditions. This device is known for its compact size, high efficiency, and reliability, making it suitable for a wide range of applications.
Basic Information Overview
- Category: Integrated Circuit
- Use: Voltage Regulation
- Characteristics: Compact Size, High Efficiency, Reliability
- Package: SOT-23
- Essence: Voltage Regulation
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 4.5V to 18V
- Output Voltage: 3.3V
- Output Current: 20mA
- Dropout Voltage: 0.2V
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The SZBZX84C33ET3G has three pins: 1. Input (VIN): Connects to the input voltage source. 2. Ground (GND): Connected to the ground reference. 3. Output (VOUT): Provides the regulated output voltage.
Functional Features
- Voltage Regulation: Maintains a constant output voltage despite variations in input voltage and load conditions.
- Overcurrent Protection: Safeguards the circuit by limiting the output current to a safe level.
- Thermal Shutdown: Protects the device from overheating by shutting down when the temperature exceeds a specified threshold.
Advantages and Disadvantages
Advantages
- Small form factor
- High efficiency
- Reliable performance
Disadvantages
- Limited output current capacity
- Higher dropout voltage compared to some alternatives
Working Principles
The SZBZX84C33ET3G utilizes a precision bandgap reference and a feedback loop to maintain a stable output voltage. When the input voltage or load changes, the internal circuitry adjusts to ensure a consistent output voltage.
Detailed Application Field Plans
The SZBZX84C33ET3G finds application in various electronic devices, including: - Battery-powered devices - Portable consumer electronics - Embedded systems - IoT devices
Detailed and Complete Alternative Models
Some alternative models to the SZBZX84C33ET3G include: - LM317 - LM7805 - AMS1117 - XC6206
In summary, the SZBZX84C33ET3G is a versatile voltage regulator with a compact design, high efficiency, and reliable performance. Its ability to provide stable voltage regulation makes it an essential component in numerous electronic applications.
[Word Count: 345]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SZBZX84C33ET3G in technische oplossingen
Sure, here are 10 common questions and answers related to the application of SZBZX84C33ET3G:
What is the SZBZX84C33ET3G?
- The SZBZX84C33ET3G is a 33V Zener diode with a maximum power dissipation of 250mW.
What are the typical applications of SZBZX84C33ET3G?
- It is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.
What is the maximum reverse current for SZBZX84C33ET3G?
- The maximum reverse current is 5μA at the test condition of VR = 28V.
What is the operating temperature range for SZBZX84C33ET3G?
- The operating temperature range is from -65°C to +150°C.
What is the thermal resistance of SZBZX84C33ET3G?
- The thermal resistance is 625°C/W.
Can SZBZX84C33ET3G be used for voltage regulation in low-power circuits?
- Yes, it is suitable for voltage regulation in low-power circuits due to its low power dissipation.
What is the package type for SZBZX84C33ET3G?
- It comes in a SOT-23 surface mount package.
Is SZBZX84C33ET3G RoHS compliant?
- Yes, it is RoHS compliant, making it suitable for use in environmentally friendly designs.
What is the tolerance of the Zener voltage for SZBZX84C33ET3G?
- The tolerance is ±5%.
Can SZBZX84C33ET3G be used for transient voltage suppression?
- Yes, it can be used for transient voltage suppression in electronic circuits.
These questions and answers should provide a good overview of the application of SZBZX84C33ET3G in technical solutions.