ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NTE4151PT1G
Details bekijken DataSheets

NTE4151PT1G

Product Overview

Category

The NTE4151PT1G belongs to the category of semiconductor devices.

Use

It is commonly used as a voltage regulator in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output current capability
  • Thermal shutdown protection

Package

The NTE4151PT1G is available in a TO-220 package.

Essence

This product is essential for stabilizing and regulating voltage in various electronic applications.

Packaging/Quantity

The NTE4151PT1G is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 1.5V at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The NTE4151PT1G typically has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • High output current capability
  • Thermal shutdown protection ensures safety

Disadvantages

  • Dropout voltage may limit efficiency in low voltage applications
  • May require additional heat sinking for high power dissipation

Working Principles

The NTE4151PT1G operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a stable output voltage despite changes in input voltage and load.

Detailed Application Field Plans

The NTE4151PT1G is widely used in various electronic applications, including: - Power supplies - Battery chargers - LED drivers - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the NTE4151PT1G include: - LM317 - LM338 - LT1083

In conclusion, the NTE4151PT1G is a versatile voltage regulator with a wide range of applications and several alternative models available in the market.

[Word count: 324]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NTE4151PT1G in technische oplossingen

  1. What is the NTE4151PT1G?

    • The NTE4151PT1G is a silicon bidirectional voltage-triggered thyristor designed for use in overvoltage protection applications.

  2. What are the typical applications of NTE4151PT1G?

    • It is commonly used in surge protection devices, AC power lines, telecommunications equipment, and industrial control systems to protect against transient voltage spikes.

  3. What is the maximum voltage rating of NTE4151PT1G?

    • The maximum voltage rating is typically around 400V.

  4. What is the holding current of NTE4151PT1G?

    • The holding current is usually in the range of 50mA to 150mA.

  5. How does NTE4151PT1G respond to overvoltage events?

    • When an overvoltage event occurs, the NTE4151PT1G switches into a low-impedance state, diverting the excess current away from sensitive components.

  6. Can NTE4151PT1G be used in both AC and DC circuits?

    • Yes, it can be used in both AC and DC circuits due to its bidirectional nature.

  7. What is the response time of NTE4151PT1G to transient voltage spikes?

    • The response time is typically very fast, in the order of nanoseconds, providing quick protection against voltage surges.

  8. Is NTE4151PT1G suitable for high-frequency applications?

    • Yes, it is suitable for high-frequency applications due to its fast response time and low capacitance.

  9. What are the key advantages of using NTE4151PT1G in overvoltage protection?

    • Some key advantages include its bidirectional capability, fast response time, low capacitance, and high surge current capability.

  10. Are there any specific layout or mounting considerations for NTE4151PT1G?

    • It is important to follow the recommended layout and mounting guidelines provided in the datasheet to ensure optimal performance and reliability.