ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NTDV6414ANT4G

NTDV6414ANT4G

Introduction

The NTDV6414ANT4G is a high-performance, quad-channel, low-capacitance TVS diode array designed to protect sensitive electronics from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning-induced surges. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: TVS Diode Array
  • Use: Protection against ESD, EFT, and surge events in sensitive electronics
  • Characteristics: Low capacitance, high performance
  • Package: 10-pin DFN (3x3mm)
  • Essence: High reliability protection for electronic circuits
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Voltage Rating: 5V
  • Reverse Standoff Voltage: 3.3V
  • Clamping Voltage: 9.2V at 5A
  • Peak Pulse Current: 30A (8/20µs)
  • Capacitance: 0.6pF (Typical)

Detailed Pin Configuration

The NTDV6414ANT4G features a 10-pin DFN package with the following pin configuration: 1. Channel 1 Input 2. Channel 1 Ground 3. Channel 2 Input 4. Channel 2 Ground 5. Channel 3 Input 6. Channel 3 Ground 7. Channel 4 Input 8. Channel 4 Ground 9. Common Ground 10. Common I/O

Functional Features

  • Quad-channel protection
  • Low clamping voltage
  • Low capacitance
  • Fast response time
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • High reliability protection
  • Low capacitance preserves signal integrity
  • Compact package size
  • RoHS compliant

Disadvantages

  • Limited to low voltage applications
  • Higher cost compared to traditional diodes

Working Principles

The NTDV6414ANT4G operates by shunting transient currents away from sensitive circuitry, thereby limiting the voltage across the protected device during surge events. Its low capacitance ensures minimal impact on signal integrity while providing robust protection.

Detailed Application Field Plans

The NTDV6414ANT4G is suitable for a wide range of applications, including: - USB ports - HDMI interfaces - Ethernet ports - Audio/Video inputs - Sensor interfaces - Mobile devices - Wearable electronics

Detailed and Complete Alternative Models

  • NTDV6414ANT4G-1: 6V Reverse Standoff Voltage
  • NTDV6414ANT4G-2: 12V Reverse Standoff Voltage
  • NTDV6414ANT4G-3: 24V Reverse Standoff Voltage

In conclusion, the NTDV6414ANT4G offers high-performance, quad-channel protection in a compact package, making it an ideal choice for safeguarding sensitive electronics from transient events.

(Word count: 411)

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NTDV6414ANT4G in technische oplossingen

  1. What is NTDV6414ANT4G?

    • NTDV6414ANT4G is a high-performance, low RDS(on) N-channel MOSFET designed for use in power management and load switching applications.

  2. What is the maximum drain-source voltage of NTDV6414ANT4G?

    • The maximum drain-source voltage of NTDV6414ANT4G is 100V.

  3. What is the typical on-resistance of NTDV6414ANT4G?

    • The typical on-resistance of NTDV6414ANT4G is 6.5mΩ at VGS = 10V.

  4. What are the key features of NTDV6414ANT4G?

    • NTDV6414ANT4G features low RDS(on), fast switching speed, and high performance, making it suitable for various power management applications.

  5. What are the recommended operating conditions for NTDV6414ANT4G?

    • The recommended operating conditions include a maximum drain-source voltage of 100V, a continuous drain current of 120A, and a maximum junction temperature of 175°C.

  6. In what technical solutions can NTDV6414ANT4G be used?

    • NTDV6414ANT4G can be used in applications such as motor control, power supplies, DC-DC converters, and load switches.

  7. What is the thermal resistance of NTDV6414ANT4G?

    • The thermal resistance of NTDV6414ANT4G is 0.45°C/W junction to case.

  8. Does NTDV6414ANT4G have any built-in protection features?

    • Yes, NTDV6414ANT4G has built-in overcurrent protection and thermal shutdown to ensure safe operation.

  9. What are the package options available for NTDV6414ANT4G?

    • NTDV6414ANT4G is available in a D2PAK package, which provides excellent thermal performance and high power handling capability.

  10. Where can I find detailed technical specifications and application notes for NTDV6414ANT4G?

    • Detailed technical specifications and application notes for NTDV6414ANT4G can be found in the product datasheet and application notes provided by the manufacturer.