ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NTD4863N-35G
Details bekijken DataSheets

NTD4863N-35G

Product Overview

The NTD4863N-35G belongs to the category of power MOSFETs and is commonly used in various electronic applications. This component is known for its high efficiency, low on-resistance, and fast switching speed. It is typically packaged in a TO-252 (DPAK) package and is available in quantities suitable for both small-scale and large-scale production.

Basic Information

  • Category: Power MOSFET
  • Use: Electronic applications requiring high efficiency and fast switching
  • Characteristics: High efficiency, low on-resistance, fast switching speed
  • Package: TO-252 (DPAK)
  • Essence: High-performance power MOSFET
  • Packaging/Quantity: Available in standard packaging suitable for various production scales

Specifications

The NTD4863N-35G features the following specifications: - Voltage Rating: 30V - Continuous Drain Current: 80A - RDS(ON): 3.5mΩ - Gate Charge: 22nC - Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The detailed pin configuration of the NTD4863N-35G is as follows: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High efficiency and fast switching speed
  • Low on-resistance for reduced power dissipation
  • Suitable for high-current applications

Advantages and Disadvantages

Advantages

  • High efficiency
  • Fast switching speed
  • Low on-resistance

Disadvantages

  • Sensitive to static electricity
  • Requires careful handling during assembly

Working Principles

The NTD4863N-35G operates based on the principles of field-effect transistors, utilizing the control of electric fields to modulate the conductivity of the device. When a voltage is applied to the gate terminal, it controls the flow of current between the drain and source terminals, allowing for efficient power regulation.

Detailed Application Field Plans

The NTD4863N-35G is well-suited for a wide range of applications, including but not limited to: - Switching power supplies - Motor control - DC-DC converters - Battery management systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the NTD4863N-35G include: - NTD5863N-35G - NTD4963N-35G - NTD4863N-40G - NTD4863N-30G

This diverse range of alternatives provides flexibility in selecting the most suitable component for specific application requirements.

Word count: 372

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NTD4863N-35G in technische oplossingen

  1. What is NTD4863N-35G?

    • NTD4863N-35G is a high-voltage, fast-switching N-channel power MOSFET designed for various technical solutions requiring efficient power management.

  2. What are the key specifications of NTD4863N-35G?

    • The key specifications include a voltage rating of 35V, a continuous drain current of 80A, and a low on-resistance for high efficiency.

  3. In what applications can NTD4863N-35G be used?

    • NTD4863N-35G is commonly used in applications such as motor control, power supplies, DC-DC converters, and electronic load switches.

  4. What are the thermal considerations for NTD4863N-35G?

    • Proper heat sinking and thermal management are important for ensuring the reliable operation of NTD4863N-35G, especially when handling high currents or power levels.

  5. Does NTD4863N-35G require any special gate driving considerations?

    • NTD4863N-35G may benefit from proper gate driving techniques to optimize its switching performance and minimize losses.

  6. Are there any recommended layout guidelines for using NTD4863N-35G?

    • Following recommended layout guidelines, including minimizing parasitic inductance and ensuring proper grounding, can help maximize the performance of NTD4863N-35G.

  7. What protection features does NTD4863N-35G offer?

    • NTD4863N-35G offers built-in protection against overcurrent, overtemperature, and other fault conditions, enhancing system reliability.

  8. Can NTD4863N-35G be used in automotive applications?

    • Yes, NTD4863N-35G is suitable for automotive applications, provided it meets the specific requirements and standards for automotive-grade components.

  9. What are the advantages of using NTD4863N-35G in technical solutions?

    • The advantages include high efficiency, fast switching speed, low on-resistance, and robustness, making it well-suited for demanding power management applications.

  10. Where can I find detailed application notes and reference designs for NTD4863N-35G?

    • Detailed application notes and reference designs for NTD4863N-35G can typically be found on the manufacturer's website or through their technical support resources.