ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NM93C46EM8
Details bekijken DataSheets

NM93C46EM8

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Non-volatile Memory
  • Characteristics: Small form factor, low power consumption
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Stores and retrieves data even when power is turned off
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Memory Size: 1K bits
  • Organization: 64 x 16 bits
  • Supply Voltage: 2.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Time: 5ms (maximum)
  • Data Retention: 200 years (minimum)

Detailed Pin Configuration

The NM93C46EM8 IC has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Enable (/W)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. Not Connected (NC)

Functional Features

  • Non-volatile memory: Retains data even without power
  • Serial interface: Allows easy integration with microcontrollers
  • Low power consumption: Ideal for battery-powered devices
  • High reliability: Data retention for up to 200 years
  • Fast write cycle time: Enables efficient data storage and retrieval

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Easy integration with microcontrollers through the serial interface
  • High reliability ensures long-term data retention
  • Fast write cycle time allows for efficient data management

Disadvantages

  • Limited memory size (1K bits) may not be sufficient for certain applications
  • Requires external components (microcontroller) for full functionality

Working Principles

The NM93C46EM8 is based on Electrically Erasable Programmable Read-Only Memory (EEPROM) technology. It utilizes a serial interface to communicate with microcontrollers. The IC stores data in non-volatile memory cells, which retain information even when power is turned off. The data can be read, written, and erased using specific commands sent through the serial interface.

Detailed Application Field Plans

The NM93C46EM8 is commonly used in various electronic devices, including:

  1. Automotive systems: Used for storing vehicle configuration data, mileage, and other settings.
  2. Consumer electronics: Integrated into smart TVs, set-top boxes, and audio equipment for storing user preferences and settings.
  3. Industrial automation: Employed in control systems to store calibration data, device configurations, and production parameters.
  4. Medical devices: Utilized for storing patient data, device settings, and calibration information.
  5. IoT devices: Integrated into sensors, smart meters, and home automation systems for data storage and retrieval.

Detailed and Complete Alternative Models

  1. AT93C46: Manufactured by Atmel, similar specifications and pin configuration.
  2. CAT93C46: Produced by Catalyst Semiconductor, compatible with NM93C46EM8.
  3. ST93C46: Offered by STMicroelectronics, comparable performance and features.

These alternative models provide similar functionality and can be used as replacements for the NM93C46EM8 in various applications.

Word count: 450 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NM93C46EM8 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of NM93C46EM8 in technical solutions:

  1. Q: What is NM93C46EM8? A: NM93C46EM8 is a popular serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology.

  2. Q: What is the storage capacity of NM93C46EM8? A: NM93C46EM8 has a storage capacity of 1 kilobit (128 bytes) organized into 64 words of 16 bits each.

  3. Q: How is NM93C46EM8 interfaced with a microcontroller? A: NM93C46EM8 uses a simple 3-wire SPI (Serial Peripheral Interface) protocol for communication with a microcontroller.

  4. Q: Can NM93C46EM8 be used for non-volatile data storage? A: Yes, NM93C46EM8 is designed for non-volatile storage, meaning it retains data even when power is removed.

  5. Q: What is the operating voltage range of NM93C46EM8? A: NM93C46EM8 operates within a voltage range of 2.5V to 5.5V, making it compatible with a wide range of systems.

  6. Q: How fast can NM93C46EM8 read and write data? A: NM93C46EM8 has a maximum clock frequency of 3 MHz, allowing for fast read and write operations.

  7. Q: Can NM93C46EM8 be reprogrammed multiple times? A: Yes, NM93C46EM8 supports a minimum endurance of 1 million write cycles, making it suitable for frequent reprogramming.

  8. Q: Does NM93C46EM8 have any built-in security features? A: No, NM93C46EM8 does not have built-in security features like write protection or password protection.

  9. Q: Can NM93C46EM8 operate in harsh environments? A: NM93C46EM8 has an industrial temperature range of -40°C to +85°C, allowing it to function reliably in harsh conditions.

  10. Q: Are there any application examples for NM93C46EM8? A: Yes, NM93C46EM8 is commonly used in applications such as automotive electronics, industrial control systems, and consumer electronics where non-volatile storage is required.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.