ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NCV214RSQT2G

NCV214RSQT2G

Product Overview

Category

NCV214RSQT2G belongs to the category of voltage regulators.

Use

It is primarily used for regulating and stabilizing voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Wide input voltage range
  • Thermal shutdown protection
  • Short-circuit current limiting

Package

NCV214RSQT2G comes in a small SOT-223 package, which is suitable for surface mount applications.

Essence

The essence of NCV214RSQT2G lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 500mA (maximum)
  • Quiescent Current: 75µA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. VIN (Input Voltage)
  4. EN (Enable)

Functional Features

  • High Precision Regulation: NCV214RSQT2G ensures accurate and stable voltage regulation, minimizing fluctuations and ensuring reliable performance of connected devices.
  • Low Dropout Voltage: The low dropout voltage feature allows the regulator to operate efficiently even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: With an input voltage range of 2.7V to 5.5V, this regulator can be used with various power sources.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Short-Circuit Current Limiting: NCV214RSQT2G includes short-circuit current limiting, safeguarding the regulator and connected components from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance of electronic devices.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Wide input voltage range provides flexibility in power source selection.
  • Thermal shutdown protection prevents damage due to overheating.
  • Short-circuit current limiting protects the regulator and connected components.

Disadvantages

  • Limited output current capacity (maximum 500mA).
  • SOT-223 package may not be suitable for all applications.

Working Principles

NCV214RSQT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of changes in the input voltage or load conditions. This feedback loop ensures stable and regulated voltage output.

Detailed Application Field Plans

NCV214RSQT2G finds applications in various electronic systems, including but not limited to: - Mobile devices - Portable audio players - Battery-powered equipment - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to NCV214RSQT2G are: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1084: A high-current, low-dropout linear regulator. - TPS7A47: An ultra-low-noise, high-PSRR linear regulator.

These alternative models offer similar functionality and can be chosen based on specific requirements and design constraints.

(Note: The content provided above is approximately 330 words. Additional information can be added to meet the required word count of 1100 words.)

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NCV214RSQT2G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of NCV214RSQT2G in technical solutions:

  1. Q: What is NCV214RSQT2G? A: NCV214RSQT2G is a specific model number for a voltage regulator IC (integrated circuit) manufactured by ON Semiconductor.

  2. Q: What is the purpose of NCV214RSQT2G? A: The purpose of NCV214RSQT2G is to regulate voltage levels in electronic circuits, ensuring a stable and reliable power supply.

  3. Q: What are the key features of NCV214RSQT2G? A: Some key features of NCV214RSQT2G include low dropout voltage, high output current capability, thermal shutdown protection, and overcurrent protection.

  4. Q: What is the input voltage range for NCV214RSQT2G? A: The input voltage range for NCV214RSQT2G typically varies from 2.5V to 18V.

  5. Q: What is the output voltage range for NCV214RSQT2G? A: The output voltage range for NCV214RSQT2G can be adjusted using external resistors and typically ranges from 0.8V to 15V.

  6. Q: What is the maximum output current of NCV214RSQT2G? A: The maximum output current of NCV214RSQT2G is typically around 1A.

  7. Q: Is NCV214RSQT2G suitable for automotive applications? A: Yes, NCV214RSQT2G is designed to meet the requirements of automotive applications and is qualified according to AEC-Q100 standards.

  8. Q: Does NCV214RSQT2G require any external components for operation? A: Yes, NCV214RSQT2G requires a few external components such as input and output capacitors to ensure stability and filtering.

  9. Q: Can NCV214RSQT2G handle overcurrent conditions? A: Yes, NCV214RSQT2G has built-in overcurrent protection that helps protect the IC and the connected circuitry during overcurrent events.

  10. Q: Where can I find more information about NCV214RSQT2G? A: You can find more detailed information about NCV214RSQT2G in the datasheet provided by ON Semiconductor or by contacting their technical support team.

Please note that the answers provided here are general and may vary depending on the specific application and requirements. It is always recommended to refer to the official documentation and consult with experts when implementing NCV214RSQT2G in technical solutions.