ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NCP5425DBR2
Details bekijken DataSheets

NCP5425DBR2

Product Overview

Category

NCP5425DBR2 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

NCP5425DBR2 comes in a small outline package (SOIC) with eight pins.

Essence

The essence of NCP5425DBR2 lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of NCP5425DBR2 units.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. SS/TR: Soft-start/Tracking pin
  6. VOUT: Output voltage pin
  7. SW: Switching node pin
  8. PGND: Power ground pin

Functional Features

  • Adjustable output voltage
  • Soft-start function for controlled startup
  • Overcurrent protection for enhanced safety
  • Thermal shutdown protection to prevent overheating
  • Enable pin for easy on/off control

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Overcurrent and thermal protection ensure device safety
  • Adjustable output voltage provides flexibility

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may cause a slight voltage drop across the regulator

Working Principles

NCP5425DBR2 operates based on a switching regulator topology. It utilizes an internal control loop to maintain a stable output voltage despite variations in input voltage and load conditions. The device employs pulse-width modulation (PWM) techniques to regulate the output voltage efficiently.

Detailed Application Field Plans

NCP5425DBR2 finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable audio players - Wireless communication devices - Industrial automation systems - Automotive electronics

Detailed and Complete Alternative Models

  1. LM317: A popular linear voltage regulator with adjustable output voltage.
  2. LT1084: A high-current linear voltage regulator with low dropout voltage.
  3. LM2596: A step-down switching regulator with adjustable output voltage.
  4. TPS5430: A synchronous buck converter with high efficiency and wide input voltage range.

These alternative models offer similar functionality and can be considered as substitutes for NCP5425DBR2 depending on specific requirements.

Word count: 345 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NCP5425DBR2 in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of NCP5425DBR2 in technical solutions:

  1. Q: What is the NCP5425DBR2? A: The NCP5425DBR2 is a high-performance synchronous buck converter IC used for voltage regulation in various electronic applications.

  2. Q: What is the input voltage range of the NCP5425DBR2? A: The NCP5425DBR2 has an input voltage range of 4.5V to 28V.

  3. Q: What is the output voltage range of the NCP5425DBR2? A: The NCP5425DBR2 can provide an adjustable output voltage range from 0.8V to 5.5V.

  4. Q: What is the maximum output current of the NCP5425DBR2? A: The NCP5425DBR2 can deliver a maximum output current of 2.5A.

  5. Q: Does the NCP5425DBR2 require an external compensation network? A: No, the NCP5425DBR2 features internal compensation, eliminating the need for an external compensation network.

  6. Q: Can the NCP5425DBR2 operate in a wide temperature range? A: Yes, the NCP5425DBR2 is designed to operate in a temperature range of -40°C to 125°C.

  7. Q: Does the NCP5425DBR2 have built-in protection features? A: Yes, the NCP5425DBR2 includes overcurrent protection, thermal shutdown, and undervoltage lockout features.

  8. Q: What type of package does the NCP5425DBR2 come in? A: The NCP5425DBR2 is available in a small and compact 8-pin SOIC package.

  9. Q: Can the NCP5425DBR2 be used in battery-powered applications? A: Yes, the NCP5425DBR2 is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  10. Q: Are there any evaluation boards or reference designs available for the NCP5425DBR2? A: Yes, ON Semiconductor provides evaluation boards and reference designs to help users quickly prototype and implement the NCP5425DBR2 in their applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.