ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
NCP1582ADR2G
Details bekijken DataSheets

NCP1582ADR2G

Product Overview

Category

NCP1582ADR2G belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in various electronic devices and systems.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

NCP1582ADR2G is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of NCP1582ADR2G lies in its ability to provide stable and regulated voltage to power electronic components.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of NCP1582ADR2G units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS: Soft-start pin
  6. PG: Power good pin
  7. VOUT: Output voltage pin
  8. SW: Switching node pin

Functional Features

  • High Efficiency: The NCP1582ADR2G offers high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The wide input voltage range allows for flexibility in various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted to meet specific requirements.
  • Overcurrent Protection: The NCP1582ADR2G incorporates overcurrent protection, safeguarding the connected components from excessive current.
  • Thermal Shutdown Protection: In case of overheating, the regulator automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range enables versatile usage.
  • Adjustable output voltage provides customization options.
  • Overcurrent and thermal shutdown protection enhance system reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

The NCP1582ADR2G operates as a step-down (buck) voltage regulator. It takes an input voltage and efficiently converts it to a lower, regulated output voltage. The internal control circuitry ensures stable output voltage despite variations in input voltage and load conditions. By utilizing pulse-width modulation (PWM) techniques, the regulator achieves high efficiency and minimizes power dissipation.

Detailed Application Field Plans

The NCP1582ADR2G finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

  1. NCP1529: Similar voltage regulator with higher maximum output current (3A).
  2. NCP1500: Voltage regulator with integrated power MOSFETs for higher power applications.
  3. NCP1117: Fixed output voltage regulator with adjustable versions available.

These alternative models offer different specifications and features, allowing users to choose the most suitable option based on their specific requirements.

Word count: 498 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van NCP1582ADR2G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of NCP1582ADR2G in technical solutions:

  1. Q: What is NCP1582ADR2G? A: NCP1582ADR2G is a high-performance, synchronous buck converter IC designed for various power management applications.

  2. Q: What is the input voltage range of NCP1582ADR2G? A: The input voltage range of NCP1582ADR2G is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of NCP1582ADR2G? A: The output voltage range of NCP1582ADR2G can be adjusted from 0.8V to 5.5V.

  4. Q: What is the maximum output current of NCP1582ADR2G? A: NCP1582ADR2G can provide a maximum output current of up to 2A.

  5. Q: Does NCP1582ADR2G support adjustable switching frequency? A: Yes, NCP1582ADR2G supports adjustable switching frequency ranging from 200kHz to 2MHz.

  6. Q: Is NCP1582ADR2G suitable for battery-powered applications? A: Yes, NCP1582ADR2G is suitable for battery-powered applications as it offers excellent efficiency and low quiescent current.

  7. Q: Can NCP1582ADR2G operate in a wide temperature range? A: Yes, NCP1582ADR2G is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  8. Q: Does NCP1582ADR2G have built-in protection features? A: Yes, NCP1582ADR2G includes built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: What type of package does NCP1582ADR2G come in? A: NCP1582ADR2G is available in a small 8-pin SOIC package.

  10. Q: Can NCP1582ADR2G be used in automotive applications? A: Yes, NCP1582ADR2G is suitable for automotive applications as it meets the necessary requirements for automotive-grade components.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.