ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MPSW55

MPSW55 Transistor

Product Overview

MPSW55 is a high-voltage NPN bipolar junction transistor (BJT) that belongs to the category of electronic components. It is commonly used in amplification and switching applications due to its high voltage capability, making it suitable for various electronic circuits. The transistor is characterized by its high voltage rating, low noise, and reliable performance. It is typically packaged in a TO-92 package and is available in both through-hole and surface mount versions. Each package contains one transistor.

Specifications

  • Maximum Collector-Emitter Voltage: 60V
  • Maximum Collector-Base Voltage: 80V
  • Maximum Emitter-Base Voltage: 5V
  • Continuous Collector Current: 0.1A
  • Power Dissipation: 625mW
  • Transition Frequency: 100MHz

Detailed Pin Configuration

The MPSW55 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability
  • Low noise
  • Reliable performance
  • Suitable for amplification and switching applications

Advantages and Disadvantages

Advantages

  • High voltage rating
  • Low noise
  • Reliable operation

Disadvantages

  • Limited collector current
  • Moderate transition frequency

Working Principles

The MPSW55 operates based on the principles of bipolar junction transistors. When a small current flows into the base terminal, it controls a larger current between the collector and emitter terminals. This allows the transistor to amplify signals or act as a switch in electronic circuits.

Detailed Application Field Plans

The MPSW55 transistor finds extensive use in audio amplifiers, signal amplification circuits, and switching applications where high voltage capabilities are required. It is also utilized in power management circuits and voltage regulators.

Detailed and Complete Alternative Models

Some alternative models to MPSW55 include: - MPSA55 - MPSW56 - MPSW54 - 2N3904

In conclusion, the MPSW55 transistor is a versatile electronic component with high voltage capabilities, making it suitable for amplification and switching applications in various electronic circuits.

[Word Count: 271]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MPSW55 in technische oplossingen

  1. What is MPSW55?

    • MPSW55 is a PNP Darlington transistor commonly used in electronic circuits for amplification and switching applications.

  2. What are the key specifications of MPSW55?

    • The MPSW55 has a maximum collector current of 500mA, a maximum collector-emitter voltage of 60V, and a DC current gain (hFE) of 1000 minimum.

  3. How can MPSW55 be used in amplifier circuits?

    • MPSW55 can be used as a driver or output stage in audio amplifier circuits due to its high current gain and low saturation voltage.

  4. In what types of switching applications is MPSW55 commonly used?

    • MPSW55 is often used in low-power switching applications such as relay drivers, LED drivers, and general purpose switching circuits.

  5. What are the typical operating conditions for MPSW55?

    • The typical operating temperature range for MPSW55 is -55°C to +150°C, making it suitable for a wide range of environments.

  6. Can MPSW55 be used in high-frequency applications?

    • While MPSW55 is not specifically designed for high-frequency applications, it can still be used in low to moderate frequency circuits effectively.

  7. What are the common alternatives to MPSW55?

    • Some common alternatives to MPSW55 include MPSA55, MPSW56, and TIP122, depending on specific circuit requirements.

  8. Are there any special considerations for driving inductive loads with MPSW55?

    • When driving inductive loads, such as relays or solenoids, it's important to include a flyback diode to protect the transistor from voltage spikes.

  9. Can MPSW55 be used in automotive applications?

    • Yes, MPSW55 can be used in automotive applications where its operating temperature range and low power capabilities make it suitable for various control circuits.

  10. What are some best practices for PCB layout when using MPSW55?

    • To minimize parasitic effects and ensure proper heat dissipation, it's recommended to keep the traces short, use adequate thermal vias, and provide sufficient clearance around the transistor for soldering and mounting.