ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MPS6514_D26Z

MPS6514_D26Z

Product Overview

Category

MPS6514_D26Z belongs to the category of semiconductor devices.

Use

It is used as a general-purpose PNP bipolar junction transistor (BJT) for various electronic applications.

Characteristics

  • Low power dissipation
  • High current gain
  • Low noise
  • High voltage capability

Package

The MPS6514_D26Z comes in a TO-92 package.

Essence

The essence of this product lies in its ability to amplify and switch electronic signals in various circuits.

Packaging/Quantity

It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Collector-Emitter Voltage: 60V
  • Collector-Base Voltage: 60V
  • Emitter-Base Voltage: 5V
  • Collector Current - Continuous: 100mA
  • Power Dissipation: 625mW
  • DC Current Gain (hFE): 100 - 300
  • Transition Frequency: 100MHz

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • Amplification of weak electronic signals
  • Switching capabilities in electronic circuits
  • Suitable for low-power applications

Advantages

  • Low power dissipation
  • High current gain
  • Versatile applications in electronic circuits

Disadvantages

  • Limited collector current compared to other transistors
  • Moderate transition frequency

Working Principles

The MPS6514_D26Z operates based on the principles of bipolar junction transistors, where the flow of current between the emitter and collector is controlled by the base current.

Detailed Application Field Plans

This transistor is commonly used in audio amplifiers, signal amplification circuits, and low-power switching applications. It can also be integrated into sensor interfaces and voltage regulators.

Detailed and Complete Alternative Models

  • BC557
  • 2N3906
  • BC327
  • 2N4403

In conclusion, the MPS6514_D26Z is a versatile PNP BJT with characteristics suitable for various low-power electronic applications. Its compact TO-92 package and functional features make it a popular choice among electronics enthusiasts and professionals.

[Word count: 298]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MPS6514_D26Z in technische oplossingen

Sure, here are 10 common questions and answers related to the application of MPS6514_D26Z in technical solutions:

  1. Question: What is the MPS6514D26Z used for?
    Answer: The MPS6514    D26Z is a general-purpose NPN bipolar junction transistor (BJT) commonly used in amplification and switching applications.

  2. Question: What are the key specifications of the MPS6514D26Z?
    Answer: The MPS6514    D26Z has a maximum collector current of 100mA, a maximum collector-emitter voltage of 60V, and a maximum power dissipation of 625mW.

  3. Question: How can the MPS6514D26Z be used in amplifier circuits?
    Answer: The MPS6514    D26Z can be used as a small-signal amplifier in audio and other low-power applications due to its low noise and high gain characteristics.

  4. Question: Can the MPS6514D26Z be used in switching applications?
    Answer: Yes, the MPS6514    D26Z can be used in low-power switching applications such as signal routing and digital logic circuits.

  5. Question: What are the typical operating conditions for the MPS6514D26Z?
    Answer: The MPS6514    D26Z operates within a temperature range of -55°C to 150°C and is suitable for use in various electronic systems.

  6. Question: Are there any specific considerations for using the MPS6514D26Z in high-frequency applications?
    Answer: While the MPS6514    D26Z can be used in moderate frequency applications, it may not be suitable for very high-frequency designs due to its transition frequency and capacitance characteristics.

  7. Question: Can the MPS6514D26Z be used in low-noise preamplifier designs?
    Answer: Yes, the MPS6514    D26Z's low noise figure makes it suitable for use in low-noise preamplifier designs for sensitive signal processing applications.

  8. Question: What are the recommended biasing and operating conditions for the MPS6514_D26Z?
    Answer: Proper biasing with appropriate base current and voltage levels should be applied to ensure optimal performance and reliability in various operating conditions.

  9. Question: Is the MPS6514D26Z suitable for battery-powered applications?
    Answer: Yes, the MPS6514    D26Z's low power consumption and moderate current handling make it suitable for battery-powered applications in portable electronics.

  10. Question: Can the MPS6514D26Z be used in automotive electronics?
    Answer: Yes, the MPS6514    D26Z can be used in automotive electronic systems where its ruggedness and reliability are advantageous for various control and sensing applications.