ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MMSZ7V5ET1
Details bekijken DataSheets

MMSZ7V5ET1

Introduction

The MMSZ7V5ET1 is a zener diode that belongs to the category of semiconductor devices. It is commonly used for voltage regulation and protection in electronic circuits. This entry provides an overview of the MMSZ7V5ET1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device (zener diode)
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Low leakage current, precise voltage regulation, small form factor
  • Package: SOD-123 package
  • Essence: Zener diode with a voltage rating of 7.5V
  • Packaging/Quantity: Typically available in reels or tape and reel packaging

Specifications

  • Voltage Rating: 7.5V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +150°C
  • Zener Impedance: 20Ω
  • Maximum Reverse Leakage Current: 100nA

Detailed Pin Configuration

The MMSZ7V5ET1 zener diode typically has two pins, with the cathode connected to the ground and the anode connected to the input voltage source.

Functional Features

  • Precise voltage regulation at 7.5V
  • Low reverse leakage current
  • Fast response time to voltage fluctuations
  • Small form factor for space-constrained applications

Advantages and Disadvantages

Advantages

  • Provides stable voltage regulation
  • Small and compact design
  • Low power dissipation
  • Wide operating temperature range

Disadvantages

  • Limited current handling capability
  • Susceptible to damage from voltage spikes

Working Principles

The MMSZ7V5ET1 operates based on the principle of the zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased. This allows it to regulate the voltage in electronic circuits and protect sensitive components from overvoltage conditions.

Detailed Application Field Plans

The MMSZ7V5ET1 is widely used in various electronic circuits, including: - Voltage regulators - Power supplies - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the MMSZ7V5ET1 zener diode include: - BZX84C7V5 - 1N4736A - MM3Z7V5ST1G - BZT52C7V5S

In conclusion, the MMSZ7V5ET1 zener diode is a crucial component in electronic circuits, providing precise voltage regulation and protection. Its compact design and stable performance make it suitable for a wide range of applications.

Word count: 398

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MMSZ7V5ET1 in technische oplossingen

  1. What is MMSZ7V5ET1?

    • MMSZ7V5ET1 is a surface mount, low-power, Zener diode with a voltage of 7.5V and a power dissipation of 500mW.

  2. What are the typical applications of MMSZ7V5ET1?

    • MMSZ7V5ET1 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications in various electronic circuits.

  3. What is the maximum current that MMSZ7V5ET1 can handle?

    • The maximum current for MMSZ7V5ET1 is typically around 50mA.

  4. How does MMSZ7V5ET1 provide overvoltage protection?

    • MMSZ7V5ET1 acts as a voltage clamp, limiting the voltage across a circuit to its specified breakdown voltage (7.5V in this case) and protecting sensitive components from damage due to excessive voltage.

  5. Can MMSZ7V5ET1 be used in reverse bias?

    • Yes, MMSZ7V5ET1 can be used in reverse bias conditions to provide overvoltage protection and voltage regulation.

  6. What are the temperature specifications for MMSZ7V5ET1?

    • MMSZ7V5ET1 typically has an operating temperature range of -65°C to +150°C.

  7. Is MMSZ7V5ET1 RoHS compliant?

    • Yes, MMSZ7V5ET1 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  8. What is the package type for MMSZ7V5ET1?

    • MMSZ7V5ET1 is available in a SOD-123 surface mount package.

  9. Can MMSZ7V5ET1 be used in automotive applications?

    • Yes, MMSZ7V5ET1 is suitable for use in automotive electronics, provided it meets the specific requirements for automotive-grade components.

  10. Where can I find the detailed datasheet for MMSZ7V5ET1?

    • The detailed datasheet for MMSZ7V5ET1 can be found on the manufacturer's website or through authorized distributors.