ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MMSZ5264BT3G
Details bekijken DataSheets

MMSZ5264BT3G

Introduction

The MMSZ5264BT3G is a Zener diode belonging to the semiconductor category. It is commonly used for voltage regulation and transient suppression in various electronic circuits. This entry provides an overview of the MMSZ5264BT3G, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor/Zener Diode
  • Use: Voltage regulation, transient suppression
  • Characteristics: Low leakage current, precise voltage regulation
  • Package: SOD-123 package
  • Essence: Zener diode for voltage regulation
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Voltage: 33V
  • Power Dissipation: 500mW
  • Operating Temperature: -65°C to +150°C
  • Zener Impedance: 40Ω
  • Maximum Reverse Leakage Current: 100nA

Detailed Pin Configuration

The MMSZ5264BT3G Zener diode has a standard SOD-123 package with two pins. The cathode is connected to the terminal marked with a line, while the anode is connected to the other terminal.

Functional Features

  • Precise voltage regulation at 33V
  • Low reverse leakage current
  • Fast response time to voltage transients

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Compact SOD-123 package
  • Low power dissipation

Disadvantages

  • Limited power dissipation capability
  • Vulnerable to overvoltage conditions

Working Principles

The MMSZ5264BT3G operates based on the Zener effect, where it maintains a constant voltage drop across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit, providing protection against voltage spikes and transients.

Detailed Application Field Plans

The MMSZ5264BT3G is widely used in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in communication systems - Transient suppression in automotive electronics - Voltage reference in instrumentation circuits

Detailed and Complete Alternative Models

Some alternative models to the MMSZ5264BT3G include: - BZX84C33LT1G - 1N4721A - BZT52C33S-7-F

In conclusion, the MMSZ5264BT3G Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and transient suppression. Its compact package and reliable performance make it suitable for a wide range of applications.

(Word count: 387)

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MMSZ5264BT3G in technische oplossingen

  1. What is the MMSZ5264BT3G?

    • The MMSZ5264BT3G is a Zener diode with a voltage of 33V and a power dissipation of 500mW.

  2. What are the typical applications of MMSZ5264BT3G?

    • It is commonly used in voltage regulation, overvoltage protection, and signal clamping in various electronic circuits.

  3. What is the maximum current that MMSZ5264BT3G can handle?

    • The maximum current for MMSZ5264BT3G is typically around 20mA.

  4. How does MMSZ5264BT3G provide overvoltage protection?

    • When the voltage across the diode exceeds its breakdown voltage (33V), it conducts and limits the voltage to protect the circuitry.

  5. Can MMSZ5264BT3G be used in reverse bias?

    • Yes, it can be used in reverse bias as a regular diode, but it will conduct when the reverse voltage reaches its breakdown voltage.

  6. What are the temperature specifications for MMSZ5264BT3G?

    • The operating temperature range is typically from -65°C to 150°C.

  7. Is MMSZ5264BT3G suitable for high-frequency applications?

    • It is not specifically designed for high-frequency applications, but it can be used in some low-frequency signal clamping circuits.

  8. Can multiple MMSZ5264BT3G be connected in series or parallel?

    • Yes, they can be connected in series to increase the breakdown voltage or in parallel to increase the current-handling capability.

  9. What are the package options available for MMSZ5264BT3G?

    • The MMSZ5264BT3G is available in SOD-123 surface mount package.

  10. Are there any important considerations when using MMSZ5264BT3G in a circuit?

    • It's important to ensure that the maximum power dissipation and current ratings are not exceeded, and to consider the voltage drop and temperature effects in the application circuit.