ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MMSZ5243BT1G
Details bekijken DataSheets

MMSZ5243BT1G

Introduction

The MMSZ5243BT1G is a Zener diode belonging to the semiconductor category. It is commonly used for voltage regulation and transient suppression in various electronic circuits. This entry provides an overview of the MMSZ5243BT1G, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor
  • Use: Voltage regulation, transient suppression
  • Characteristics: Zener diode, low leakage current, high reliability
  • Package: SOD-123 package
  • Essence: Voltage regulation and transient suppression
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Voltage - Zener (Nom) (Vz): 13V
  • Power - Max: 500mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA
  • Operating Temperature: -65°C to 150°C

Detailed Pin Configuration

The MMSZ5243BT1G has three pins: 1. Anode 2. Cathode 3. Not connected (NC)

Functional Features

  • Precise voltage regulation
  • Transient suppression
  • Low reverse leakage current
  • High reliability

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Low leakage current
  • Small form factor

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The MMSZ5243BT1G operates based on the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased. This allows it to regulate voltage and suppress transients in electronic circuits.

Detailed Application Field Plans

The MMSZ5243BT1G finds applications in various electronic systems, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Power supplies - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the MMSZ5243BT1G include: - BZX84C13LT1G - MMBZ5243BLT1G - PZU13B2A,115 - BZT52C13-7-F

In conclusion, the MMSZ5243BT1G Zener diode offers precise voltage regulation and transient suppression capabilities, making it suitable for a wide range of electronic applications.

[Word count: 345 words]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MMSZ5243BT1G in technische oplossingen

  1. What is the MMSZ5243BT1G?

    • The MMSZ5243BT1G is a Zener diode designed for voltage regulation and protection in electronic circuits.

  2. What is the maximum power dissipation of the MMSZ5243BT1G?

    • The maximum power dissipation of the MMSZ5243BT1G is 500mW.

  3. What is the voltage rating of the MMSZ5243BT1G?

    • The MMSZ5243BT1G has a nominal Zener voltage of 12V.

  4. What are the typical applications of the MMSZ5243BT1G?

    • Typical applications include voltage regulation, overvoltage protection, and signal clamping in various electronic circuits.

  5. What is the operating temperature range of the MMSZ5243BT1G?

    • The MMSZ5243BT1G has an operating temperature range of -65°C to 150°C.

  6. What is the package type of the MMSZ5243BT1G?

    • The MMSZ5243BT1G is available in a SOD-123 surface mount package.

  7. What is the reverse standoff voltage of the MMSZ5243BT1G?

    • The reverse standoff voltage of the MMSZ5243BT1G is 9.5V.

  8. Can the MMSZ5243BT1G be used for ESD protection?

    • Yes, the MMSZ5243BT1G can be used for electrostatic discharge (ESD) protection in electronic circuits.

  9. What are the key electrical characteristics of the MMSZ5243BT1G?

    • Key electrical characteristics include the Zener voltage, reverse leakage current, and dynamic impedance.

  10. Is the MMSZ5243BT1G RoHS compliant?

    • Yes, the MMSZ5243BT1G is RoHS compliant, making it suitable for use in environmentally friendly electronic products.