Zie specificaties voor productdetails.
MMSZ2V4ET1
Introduction
The MMSZ2V4ET1 is a diode belonging to the category of Zener diodes. It is commonly used in electronic circuits for voltage regulation and protection against voltage spikes. This entry provides an overview of the MMSZ2V4ET1, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Zener diode
- Use: Voltage regulation and protection
- Characteristics: Low leakage current, precise voltage regulation
- Package: SOD-123
- Essence: Silicon semiconductor
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Voltage - Zener (Nom) (Vz): 2.4V
- Power - Max: 500mW
- Impedance (Max) (Zzt): 20 Ohm
- Current - Reverse Leakage @ Vr: 100nA
- Operating Temperature: -65°C ~ 150°C
Detailed Pin Configuration
The MMSZ2V4ET1 has three pins: 1. Anode 2. Cathode 3. No Connection (NC)
Functional Features
- Precise voltage regulation at 2.4V
- Low reverse leakage current
- Fast response time to voltage spikes
Advantages and Disadvantages
Advantages
- Accurate voltage regulation
- Small form factor
- Low power dissipation
Disadvantages
- Limited power handling capability
- Sensitivity to temperature variations
Working Principles
The MMSZ2V4ET1 operates based on the Zener effect, where it maintains a constant voltage drop across its terminals when reverse-biased. This allows it to regulate the voltage in a circuit and protect sensitive components from overvoltage conditions.
Detailed Application Field Plans
The MMSZ2V4ET1 finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in consumer electronics - Signal clamping in communication systems
Detailed and Complete Alternative Models
Some alternative models to the MMSZ2V4ET1 include: - BZX84C2V4LT1G - MM3Z2V4ST1G - PZM2V4NT1G
In conclusion, the MMSZ2V4ET1 Zener diode offers precise voltage regulation and protection in a compact package, making it suitable for a wide range of electronic applications.
[Word count: 345]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MMSZ2V4ET1 in technische oplossingen
What is MMSZ2V4ET1?
- MMSZ2V4ET1 is a surface mount zener diode with a voltage rating of 2.4V and a power dissipation of 500mW.
What are the typical applications of MMSZ2V4ET1?
- MMSZ2V4ET1 is commonly used in voltage regulation, overvoltage protection, and signal clamping applications in various electronic circuits.
What is the maximum current that MMSZ2V4ET1 can handle?
- The maximum current for MMSZ2V4ET1 is typically around 50mA.
How does MMSZ2V4ET1 provide overvoltage protection?
- MMSZ2V4ET1 acts as a voltage clamp, conducting current when the voltage across it exceeds its rated voltage, thereby protecting downstream components from overvoltage conditions.
Can MMSZ2V4ET1 be used in reverse bias?
- Yes, MMSZ2V4ET1 can be used in reverse bias to provide voltage clamping and protection against negative voltage transients.
What is the temperature range for MMSZ2V4ET1?
- MMSZ2V4ET1 typically operates within a temperature range of -55°C to 150°C.
Is MMSZ2V4ET1 RoHS compliant?
- Yes, MMSZ2V4ET1 is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.
What is the package type for MMSZ2V4ET1?
- MMSZ2V4ET1 is available in a SOD-123 surface mount package.
What are the key electrical characteristics of MMSZ2V4ET1?
- Key electrical characteristics include a nominal zener voltage of 2.4V, a maximum reverse leakage current of 5µA, and a maximum dynamic impedance of 60Ω.
Are there any recommended layout considerations for using MMSZ2V4ET1 in a circuit?
- It is recommended to minimize trace lengths and keep the zener diode close to the load it is protecting to reduce parasitic inductance and ensure effective voltage regulation and protection.