MM3Z6V8ST1G

Product Overview

Category: Diode
Use: Voltage regulation and protection
Characteristics: Small signal, low leakage current, high reliability
Package: SOD-323
Essence: Zener diode
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Voltage - Zener (Nom) (Vz): 6.8V
Power - Max: 200mW
Impedance (Max) (Zzt): 40 Ohm
Current - Reverse Leakage @ Vr: 100nA
Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The MM3Z6V8ST1G is a SOD-323 packaged diode with two pins. The cathode is connected to the pin on the left when viewing the flat side of the package.

Functional Features

Precise voltage regulation
Protection against overvoltage conditions
Low reverse leakage current
High reliability and small signal characteristics

Advantages and Disadvantages

Advantages

Small form factor
Reliable voltage regulation
Low leakage current

Disadvantages

Limited power dissipation capability
Sensitive to temperature variations

Working Principles

The MM3Z6V8ST1G operates based on the principle of the Zener effect, where it maintains a constant voltage across its terminals when reverse biased. This allows it to regulate voltage and protect circuits from overvoltage conditions.

Detailed Application Field Plans

The MM3Z6V8ST1G is commonly used in various electronic circuits such as: - Voltage regulators - Overvoltage protection circuits - Signal conditioning circuits - Power supplies

Detailed and Complete Alternative Models

Some alternative models to the MM3Z6V8ST1G include: - BZX84C6V8LT1G - MMBZ6V8ALT1G - PZM6V8NB,115

In conclusion, the MM3Z6V8ST1G is a reliable and compact Zener diode that provides precise voltage regulation and overvoltage protection in various electronic applications.

[Word Count: 314]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MM3Z6V8ST1G in technische oplossingen

What is MM3Z6V8ST1G?
- MM3Z6V8ST1G is a Zener diode with a voltage of 6.8V and a power rating of 200mW, commonly used in electronic circuits for voltage regulation and protection.
How does MM3Z6V8ST1G work in voltage regulation?
- MM3Z6V8ST1G works by allowing current to flow in the forward direction like a regular diode, but when the voltage across it reaches its specified value (6.8V), it starts conducting heavily in reverse bias, effectively clamping the voltage at 6.8V.
What are the typical applications of MM3Z6V8ST1G in technical solutions?
- MM3Z6V8ST1G is commonly used in voltage regulation, overvoltage protection, and signal conditioning in various electronic devices and circuits.
Can MM3Z6V8ST1G be used for voltage reference in precision circuits?
- Yes, MM3Z6V8ST1G can be used as a stable voltage reference due to its precise Zener voltage of 6.8V.
What are the key electrical characteristics of MM3Z6V8ST1G?
- The key electrical characteristics include its Zener voltage of 6.8V, maximum power dissipation of 200mW, and low leakage current.
Is MM3Z6V8ST1G suitable for high-frequency applications?
- MM3Z6V8ST1G may not be ideal for high-frequency applications due to its inherent capacitance and response time.
How should MM3Z6V8ST1G be connected in a circuit for optimal performance?
- MM3Z6V8ST1G should be connected in reverse bias across the load or in parallel with the load to regulate the voltage effectively.
What are the temperature considerations for MM3Z6V8ST1G?
- MM3Z6V8ST1G's performance is affected by temperature, so it's important to consider its temperature coefficient and derating guidelines for proper operation.
Can MM3Z6V8ST1G be used in automotive electronics?
- Yes, MM3Z6V8ST1G is often used in automotive electronics for voltage regulation and protection due to its reliability and stability.
Are there any alternatives to MM3Z6V8ST1G for similar applications?
- Yes, other Zener diodes with different voltage ratings and power dissipation capabilities can be considered based on specific application requirements.