ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
LM2575T-5G
Details bekijken DataSheets

LM2575T-5G

Product Overview

Category

LM2575T-5G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • LM2575T-5G is a high-performance step-down switching regulator.
  • It has a wide input voltage range and can provide a stable output voltage.
  • The device operates at a high switching frequency, ensuring efficient power conversion.
  • It offers excellent line and load regulation, making it suitable for various applications.
  • LM2575T-5G incorporates thermal shutdown and current limit protection features.

Package

The LM2575T-5G comes in a TO-220 package, which provides good thermal dissipation properties.

Essence

The essence of LM2575T-5G lies in its ability to efficiently regulate voltage while maintaining stability and reliability in electronic circuits.

Packaging/Quantity

The LM2575T-5G is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 4.75V to 40V
  • Output Voltage: 5V
  • Maximum Output Current: 1A
  • Switching Frequency: 52 kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LM2575T-5G has the following pin configuration:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. FB (Pin 3): Feedback pin for setting the output voltage.
  4. SW (Pin 4): Switching pin connected to the inductor.
  5. VOUT (Pin 5): Output voltage pin.

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency and low power dissipation.
  • Over-temperature and over-current protection ensure device safety.
  • Adjustable output voltage through external resistors.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation.
  • Wide input voltage range.
  • Excellent line and load regulation.
  • Thermal shutdown and current limit protection features.

Disadvantages

  • Relatively low maximum output current compared to some other models.
  • Requires external components for proper operation.

Working Principles

The LM2575T-5G operates on the principle of pulse-width modulation (PWM). It uses a feedback mechanism to regulate the duty cycle of the switching transistor, which in turn controls the output voltage. By adjusting the duty cycle, the LM2575T-5G maintains a stable output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The LM2575T-5G finds application in various fields, including: 1. Power supply circuits for microcontrollers and digital devices. 2. Battery charging circuits. 3. Automotive electronics. 4. Industrial control systems. 5. LED lighting applications.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to LM2575T-5G include: 1. LM2596T-5.0: A step-down switching regulator with adjustable output voltage. 2. LM317T: A linear voltage regulator with adjustable output voltage. 3. LT1084CT-5: A high-current linear voltage regulator with fixed 5V output.

These alternative models can be considered based on specific requirements and design constraints.

In conclusion, the LM2575T-5G is a versatile voltage regulator with excellent performance characteristics. Its wide input voltage range, efficient power conversion, and built-in protection features make it suitable for various electronic applications.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van LM2575T-5G in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of LM2575T-5G in technical solutions:

  1. Q: What is LM2575T-5G? A: LM2575T-5G is a step-down voltage regulator IC that can convert higher input voltages to a regulated 5V output.

  2. Q: What is the maximum input voltage supported by LM2575T-5G? A: The maximum input voltage supported by LM2575T-5G is 40V.

  3. Q: What is the typical output current capability of LM2575T-5G? A: The typical output current capability of LM2575T-5G is 1A.

  4. Q: How do I calculate the required input capacitor for LM2575T-5G? A: The input capacitor value can be calculated using the formula Cin = (Iout * D) / (f * ΔV), where I_out is the output current, D is the duty cycle, f is the switching frequency, and ΔV is the allowable input voltage ripple.

  5. Q: Can LM2575T-5G operate with an input voltage lower than 5V? A: No, LM2575T-5G requires an input voltage higher than 5V to regulate it down to 5V.

  6. Q: Is LM2575T-5G suitable for battery-powered applications? A: Yes, LM2575T-5G can be used in battery-powered applications as long as the input voltage is within its specified range.

  7. Q: How do I set the output voltage of LM2575T-5G? A: The output voltage can be set by choosing the appropriate resistor values for the feedback network connected to the FB pin of LM2575T-5G.

  8. Q: Can LM2575T-5G handle a short circuit on its output? A: No, LM2575T-5G does not have built-in short-circuit protection. It is recommended to use an external current-limiting circuitry to protect it from short circuits.

  9. Q: What is the typical efficiency of LM2575T-5G? A: The typical efficiency of LM2575T-5G is around 85-90%, depending on the input and output voltage conditions.

  10. Q: Are there any specific layout considerations for using LM2575T-5G? A: Yes, it is important to follow the recommended layout guidelines provided in the datasheet to minimize noise, ensure proper heat dissipation, and maintain stable operation of LM2575T-5G.