Zie specificaties voor productdetails.
FLZ10VB
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: TO-220
Essence: Linear regulator
Packaging/Quantity: Bulk packaging, 50 pieces per pack
Specifications
- Input Voltage: 4.5V to 24V
- Output Voltage: 1.25V to 20V
- Dropout Voltage: 1.3V at 1A
- Maximum Output Current: 1A
- Line Regulation: 0.2%
- Load Regulation: 0.4%
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input)
- Vout (Output)
- GND (Ground)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short circuit current limit
- Reverse battery protection
Advantages and Disadvantages
Advantages: - High precision output - Wide input voltage range - Compact TO-220 package
Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some modern regulators
Working Principles
FLZ10VB is a linear voltage regulator that operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.
Detailed Application Field Plans
FLZ10VB is commonly used in applications requiring a stable and precise voltage supply, such as: - Battery-powered devices - Instrumentation - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- LM1117
- L78xx series
- LT1086
This completes the entry for FLZ10VB, providing comprehensive information about its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
[Word count: 253]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van FLZ10VB in technische oplossingen
What is FLZ10VB?
- FLZ10VB is a type of varistor, also known as a voltage-dependent resistor, which is commonly used to protect electronic circuits from overvoltage conditions.
How does FLZ10VB work?
- FLZ10VB works by exhibiting a high resistance at normal operating voltages, but rapidly decreasing its resistance when the voltage exceeds a certain threshold, thereby diverting excess current away from sensitive components.
What are the typical applications of FLZ10VB?
- FLZ10VB is commonly used in power supplies, surge protectors, and electronic equipment to safeguard against transient voltage spikes and surges.
What is the maximum voltage rating of FLZ10VB?
- The maximum voltage rating of FLZ10VB is typically around 10V, making it suitable for low-voltage protection applications.
Can FLZ10VB be used in automotive electronics?
- Yes, FLZ10VB can be utilized in automotive electronics to protect sensitive components from voltage transients caused by the vehicle's electrical system.
Is FLZ10VB suitable for use in industrial control systems?
- Yes, FLZ10VB is often employed in industrial control systems to provide overvoltage protection for PLCs, sensors, and other critical equipment.
What are the temperature specifications for FLZ10VB?
- FLZ10VB typically has a wide operating temperature range, making it suitable for various environmental conditions, with common specifications ranging from -40°C to 85°C.
Are there any specific mounting considerations for FLZ10VB?
- FLZ10VB can be surface-mounted or through-hole mounted, and care should be taken to ensure proper heat dissipation and electrical connections.
Can FLZ10VB be used in conjunction with other protective devices?
- Yes, FLZ10VB is often used in combination with other protective components such as fuses, TVS diodes, and inductors to create comprehensive overvoltage protection solutions.
What are the failure modes of FLZ10VB?
- FLZ10VB can fail in either a short-circuit or open-circuit mode when subjected to excessive overvoltage conditions, and it's important to consider these failure modes in the overall system design.