ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
FDPF8D5N10C
Details bekijken DataSheets

FDPF8D5N10C Encyclopedia Entry

Product Overview

The FDPF8D5N10C belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET is characterized by its high voltage and current handling capabilities, making it suitable for a wide range of applications. The package type for the FDPF8D5N10C is typically a TO-220F, and it is available in various quantities per package.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 8A
  • Package Type: TO-220F
  • Quantity per Package: Varies

Detailed Pin Configuration

The FDPF8D5N10C MOSFET typically features three pins: gate, drain, and source. The pin configuration is as follows: - Gate (G) - Pin 1 - Drain (D) - Pin 2 - Source (S) - Pin 3

Functional Features

  • High voltage and current handling capacity
  • Low on-state resistance
  • Fast switching speed
  • Enhanced thermal performance

Advantages and Disadvantages

Advantages

  • Suitable for high-power applications
  • Low conduction losses
  • Efficient heat dissipation

Disadvantages

  • Gate capacitance may affect high-frequency performance
  • Sensitive to electrostatic discharge (ESD)

Working Principles

The FDPF8D5N10C operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to pass through, enabling it to function as a switch or amplifier.

Detailed Application Field Plans

The FDPF8D5N10C is commonly used in the following application fields: - Power supplies - Motor control - Audio amplifiers - LED lighting - DC-DC converters

Detailed and Complete Alternative Models

Some alternative models to the FDPF8D5N10C include: - IRF540N - STP80NF55-06 - FQP30N06L - IRLB8743

In conclusion, the FDPF8D5N10C power MOSFET offers high-performance characteristics suitable for a variety of electronic applications, with specific advantages and disadvantages that should be considered when selecting it for a particular design.

[Word count: 298]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van FDPF8D5N10C in technische oplossingen

  1. What is FDPF8D5N10C?

    • FDPF8D5N10C is a power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) designed for use in various technical solutions requiring high power switching capabilities.

  2. What are the key specifications of FDPF8D5N10C?

    • The key specifications include a drain-source voltage (VDS) of 100V, continuous drain current (ID) of 8A, and low on-resistance (RDS(on)).

  3. In what applications can FDPF8D5N10C be used?

    • FDPF8D5N10C is commonly used in applications such as power supplies, motor control, and lighting systems due to its high power handling capabilities.

  4. What are the thermal characteristics of FDPF8D5N10C?

    • The thermal resistance junction-to-ambient (RθJA) and junction-to-case (RθJC) values are important for determining the heat dissipation capabilities of the MOSFET in different applications.

  5. How does FDPF8D5N10C compare to other similar MOSFETs in the market?

    • FDPF8D5N10C offers a balance of performance, cost-effectiveness, and reliability compared to other MOSFETs with similar specifications.

  6. What are the recommended operating conditions for FDPF8D5N10C?

    • It is important to operate FDPF8D5N10C within the specified voltage, current, and temperature ranges to ensure optimal performance and longevity.

  7. Are there any application notes or reference designs available for using FDPF8D5N10C?

    • Manufacturers often provide application notes and reference designs to assist engineers in integrating FDPF8D5N10C into their technical solutions.

  8. What are the typical failure modes of FDPF8D5N10C and how can they be mitigated?

    • Understanding potential failure modes such as overcurrent, overvoltage, and thermal stress can help in implementing protective measures like current limiting and thermal management.

  9. Can FDPF8D5N10C be used in automotive applications?

    • FDPF8D5N10C may be suitable for certain automotive applications, but it is essential to verify its compliance with automotive standards and requirements.

  10. Where can I find reliable sources for purchasing FDPF8D5N10C and obtaining technical support?

    • Authorized distributors and manufacturers' websites are reliable sources for purchasing genuine FDPF8D5N10C components and accessing technical support and documentation.