ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
FDPF2D3N10C
Details bekijken DataSheets

FDPF2D3N10C

Product Overview

Category

The FDPF2D3N10C belongs to the category of power MOSFETs.

Use

It is used as a switching device in various electronic circuits and applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The FDPF2D3N10C is typically available in a TO-220F package.

Essence

This MOSFET is essential for controlling power flow in electronic circuits, especially in high-power applications.

Packaging/Quantity

It is commonly packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 2.3A
  • On-Resistance (RDS(on)): 0.35Ω
  • Power Dissipation (PD): 25W
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The FDPF2D3N10C has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows it to be used in various power control applications.
  • Low on-resistance minimizes power loss and improves efficiency.
  • Fast switching speed enables rapid control of power flow.

Advantages

  • Suitable for high-voltage applications
  • Low power dissipation
  • Fast response time

Disadvantages

  • Limited continuous drain current compared to higher-rated MOSFETs
  • Higher on-resistance compared to some specialized MOSFETs

Working Principles

The FDPF2D3N10C operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The FDPF2D3N10C is commonly used in: - Switching power supplies - Motor control circuits - LED lighting applications - DC-DC converters

Detailed and Complete Alternative Models

Some alternative models to the FDPF2D3N10C include: - IRF540N - STP16NF06L - FQP30N06L

In conclusion, the FDPF2D3N10C is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for various power control applications.

(Word count: 327)

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van FDPF2D3N10C in technische oplossingen

  1. What is FDPF2D3N10C?

    • FDPF2D3N10C is a specific type of power MOSFET transistor commonly used in electronic circuits for switching and amplification.

  2. What are the key features of FDPF2D3N10C?

    • The key features of FDPF2D3N10C include low on-resistance, high current capability, fast switching speed, and low gate drive power.

  3. How is FDPF2D3N10C typically used in technical solutions?

    • FDPF2D3N10C is often used in applications such as power supplies, motor control, lighting control, and audio amplifiers.

  4. What are the voltage and current ratings of FDPF2D3N10C?

    • FDPF2D3N10C typically has a voltage rating of around 100V and a current rating of several amps.

  5. What are the thermal considerations when using FDPF2D3N10C in a design?

    • Thermal considerations include proper heat sinking and thermal management to ensure the device operates within its temperature limits.

  6. Are there any common failure modes associated with FDPF2D3N10C?

    • Common failure modes may include overcurrent or overvoltage conditions leading to thermal stress or electrical breakdown.

  7. What are the typical application circuits for FDPF2D3N10C?

    • Typical application circuits include switch-mode power supplies, motor drive circuits, and audio amplifier output stages.

  8. How does FDPF2D3N10C compare to other similar MOSFET transistors?

    • FDPF2D3N10C may offer lower on-resistance, higher current capability, or better switching characteristics compared to other MOSFETs in its class.

  9. What are the recommended operating conditions for FDPF2D3N10C?

    • Recommended operating conditions include staying within the specified voltage and current limits, as well as ensuring proper gate drive voltage and timing.

  10. Where can I find detailed specifications and application notes for FDPF2D3N10C?

    • Detailed specifications and application notes can typically be found in the manufacturer's datasheet or application guides for the FDPF2D3N10C.