ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
FCP20N60_G

FCP20N60_G

Product Overview

Category: Power MOSFET
Use: Power electronics applications
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Power switching and amplification
Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Voltage Rating: 600V
  • Current Rating: 20A
  • RDS(ON): 0.25Ω
  • Gate Charge (Qg): 50nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The FCP20N60_G has a standard TO-220AB pin configuration with three pins: gate, drain, and source.

Functional Features

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Advantages and Disadvantages

Advantages: - Suitable for high power applications - Low conduction losses - Fast switching times

Disadvantages: - Higher gate drive requirements compared to lower voltage MOSFETs - More sensitive to voltage spikes due to higher voltage rating

Working Principles

The FCP20N60_G operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through it, acting as a switch or amplifier in power electronic circuits.

Detailed Application Field Plans

The FCP20N60_G is commonly used in: - Switching power supplies - Motor control - Inverters - Audio amplifiers - LED lighting

Detailed and Complete Alternative Models

  • IRFP460: Similar voltage and current ratings
  • STP20N60: Comparable specifications and package type
  • FDPF20N60: Alternative from a different manufacturer with similar characteristics

This comprehensive entry provides an in-depth understanding of the FCP20N60_G, covering its product details, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van FCP20N60_G in technische oplossingen

  1. What is the maximum voltage rating of FCP20N60_G?

    • The maximum voltage rating of FCP20N60_G is 600V.

  2. What is the maximum continuous drain current of FCP20N60_G?

    • The maximum continuous drain current of FCP20N60_G is 20A.

  3. What is the on-state resistance (RDS(on)) of FCP20N60_G?

    • The on-state resistance (RDS(on)) of FCP20N60_G is typically 0.2 ohms.

  4. What type of package does FCP20N60_G come in?

    • FCP20N60_G comes in a TO-220 package.

  5. What are the typical applications for FCP20N60_G?

    • FCP20N60_G is commonly used in power supplies, motor control, and lighting applications.

  6. What is the operating temperature range of FCP20N60_G?

    • The operating temperature range of FCP20N60_G is -55°C to 150°C.

  7. Does FCP20N60_G have built-in protection features?

    • FCP20N60_G does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.

  8. Is FCP20N60_G suitable for high-frequency switching applications?

    • Yes, FCP20N60_G is suitable for high-frequency switching due to its low on-state resistance and fast switching characteristics.

  9. What gate-source voltage is required to fully turn on FCP20N60_G?

    • A gate-source voltage of around 10V is typically required to fully turn on FCP20N60_G.

  10. Can FCP20N60_G be used in parallel to increase current handling capability?

    • Yes, FCP20N60_G can be used in parallel to increase current handling capability, but proper thermal management is essential to ensure balanced current sharing.