ON Semiconductor
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
BZX84B9V1LT1
Details bekijken DataSheets

BZX84B9V1LT1 - Diode Encyclopedia Entry

Introduction

The BZX84B9V1LT1 is a diode belonging to the category of voltage regulator diodes. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator Diode
  • Use: The BZX84B9V1LT1 is commonly used for voltage regulation and protection in electronic circuits.
  • Characteristics: It exhibits stable voltage regulation, low leakage current, and high reliability.
  • Package: SOT-23 (TO-236AB)
  • Essence: The diode serves as a reliable voltage reference and regulator in various electronic applications.
  • Packaging/Quantity: Available in tape and reel packaging with quantities varying based on supplier.

Specifications

  • Voltage Rating: 9.1V
  • Power Dissipation: 350mW
  • Forward Current: 200mA
  • Reverse Leakage Current: 5μA
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The BZX84B9V1LT1 diode has three pins: 1. Anode (A): Connects to the positive terminal of the circuit. 2. Cathode (K): Connects to the negative terminal of the circuit. 3. No Connection (NC): Not internally connected and left unconnected in the circuit.

Functional Features

  • Stable Voltage Regulation: Maintains a constant output voltage under varying load conditions.
  • Low Leakage Current: Minimizes power loss and enhances efficiency.
  • Fast Response Time: Rapidly clamps voltage spikes and transients, protecting downstream components.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low leakage current
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited maximum current handling capability
  • Sensitive to reverse voltage polarity

Working Principles

The BZX84B9V1LT1 operates based on the principle of Zener breakdown, where it maintains a constant voltage drop across its terminals by allowing controlled reverse current flow at a specific voltage level.

Detailed Application Field Plans

The BZX84B9V1LT1 finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in consumer electronics - Signal conditioning in sensor interfaces - Voltage reference in analog circuits

Detailed and Complete Alternative Models

Some alternative models to the BZX84B9V1LT1 include: - BZX84C9V1LT1: Similar characteristics with a slightly different voltage rating. - BZX84B10LT1: Higher voltage rating with comparable characteristics. - BZX85B9V1LT1: Through-hole package variant with similar specifications.

In conclusion, the BZX84B9V1LT1 diode serves as a reliable voltage regulator and protector in various electronic circuits, offering stable voltage regulation, low leakage current, and fast response time. Its application spans across diverse fields, and several alternative models are available to suit specific design requirements.

Word Count: 443

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van BZX84B9V1LT1 in technische oplossingen

  1. What is the BZX84B9V1LT1?

    • The BZX84B9V1LT1 is a 9.1V Zener diode designed for voltage regulation and protection in various electronic circuits.

  2. What is the maximum power dissipation of the BZX84B9V1LT1?

    • The maximum power dissipation of the BZX84B9V1LT1 is typically 250mW.

  3. What is the forward voltage drop of the BZX84B9V1LT1?

    • The forward voltage drop of the BZX84B9V1LT1 is typically around 0.9V at a forward current of 5mA.

  4. What is the reverse leakage current of the BZX84B9V1LT1?

    • The reverse leakage current of the BZX84B9V1LT1 is typically very low, in the range of nanoamperes.

  5. How can the BZX84B9V1LT1 be used in voltage regulation?

    • The BZX84B9V1LT1 can be used as a shunt regulator to maintain a constant output voltage in a circuit.

  6. What are some common applications of the BZX84B9V1LT1?

    • Common applications include voltage clamping, overvoltage protection, and voltage stabilization in various electronic devices.

  7. What is the temperature coefficient of the BZX84B9V1LT1?

    • The temperature coefficient of the BZX84B9V1LT1 is typically around -2mV/°C, indicating its stability over a range of temperatures.

  8. What is the maximum reverse standoff voltage of the BZX84B9V1LT1?

    • The maximum reverse standoff voltage of the BZX84B9V1LT1 is 9.1V.

  9. Can the BZX84B9V1LT1 be used in automotive applications?

    • Yes, the BZX84B9V1LT1 is suitable for use in automotive electronics due to its voltage regulation and protection capabilities.

  10. What are the key features of the BZX84B9V1LT1?

    • The key features include a small form factor, high reliability, and precise voltage regulation, making it ideal for various technical solutions.