Zie specificaties voor productdetails.
MXLP6KE68AE3 Encyclopedia Entry
Product Overview
- Category: Electronic Component
- Use: Surge Protection
- Characteristics: High energy absorption, fast response time
- Package: Axial leaded
- Essence: Protects electronic circuits from voltage spikes
- Packaging/Quantity: Typically sold in reels of 1000 units
Specifications
- Voltage Rating: 6.8V
- Peak Pulse Power: 600W
- Breakdown Voltage: 7.58V
- Clamping Voltage: 11.4V
- Peak Pulse Current: 52.6A
- Operating Temperature Range: -55°C to +175°C
Detailed Pin Configuration
- Anode (A): Connects to the positive side of the circuit
- Cathode (K): Connects to the ground or negative side of the circuit
Functional Features
- Provides transient voltage suppression for sensitive electronics
- Fast response time ensures minimal damage to protected circuits
- Low clamping voltage limits stress on downstream components
Advantages and Disadvantages
- Advantages:
- Effective protection against voltage spikes
- Fast response time
- Wide operating temperature range
- Disadvantages:
- Limited to specific voltage ratings
- Requires proper installation for optimal performance
Working Principles
The MXLP6KE68AE3 operates by diverting excess voltage away from sensitive electronic components when a surge occurs. It rapidly absorbs the energy of the surge, preventing it from reaching the protected circuit.
Detailed Application Field Plans
This surge protection component is commonly used in: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- Alternative Model 1: MXLP6KE10AE3 (10V rating)
- Alternative Model 2: MXLP6KE33AE3 (33V rating)
- Alternative Model 3: MXLP6KE51AE3 (51V rating)
This comprehensive entry provides an in-depth understanding of the MXLP6KE68AE3 surge protection component, including its specifications, functional features, application fields, and alternative models.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MXLP6KE68AE3 in technische oplossingen
What is MXLP6KE68AE3 used for in technical solutions?
- MXLP6KE68AE3 is commonly used as a transient voltage suppressor (TVS) diode to protect sensitive electronic components from voltage spikes and transients.
What is the maximum clamping voltage of MXLP6KE68AE3?
- The maximum clamping voltage of MXLP6KE68AE3 is typically around 121 volts at a peak pulse current of 10/1000 µs.
What is the breakdown voltage of MXLP6KE68AE3?
- The breakdown voltage of MXLP6KE68AE3 is approximately 61.1 volts.
What is the peak pulse power dissipation of MXLP6KE68AE3?
- The peak pulse power dissipation of MXLP6KE68AE3 is usually around 600 watts for a 10/1000 µs waveform.
What are the typical applications of MXLP6KE68AE3 in technical solutions?
- MXLP6KE68AE3 is commonly used in surge protection for telecommunications equipment, industrial control systems, automotive electronics, and power supplies.
What is the operating temperature range of MXLP6KE68AE3?
- The operating temperature range of MXLP6KE68AE3 is typically between -55°C to +175°C.
Does MXLP6KE68AE3 meet any specific industry standards or certifications?
- MXLP6KE68AE3 may be compliant with industry standards such as AEC-Q101 for automotive applications and RoHS for environmental compliance.
Can MXLP6KE68AE3 be used for ESD protection?
- While MXLP6KE68AE3 is primarily designed for transient voltage suppression, it can provide some level of electrostatic discharge (ESD) protection as well.
What package type is MXLP6KE68AE3 available in?
- MXLP6KE68AE3 is commonly available in a DO-15 package, which is a cylindrical axial-leaded package.
Are there any recommended layout or mounting considerations for MXLP6KE68AE3?
- It is recommended to minimize the length of the leads and keep the device close to the protected circuit to reduce inductance and optimize performance. Additionally, proper heat sinking may be necessary for high-power applications.