Microsemi Corporation
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
MXL15KP33CA
Details bekijken DataSheets

MXL15KP33CA Product Overview

Introduction

The MXL15KP33CA is a high-performance electronic component designed for use in power management applications. This article provides an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Management IC
  • Use: Voltage Regulation and Protection
  • Characteristics: High Efficiency, Low Power Dissipation
  • Package: TO-220
  • Essence: Regulating and Protecting Voltage Levels
  • Packaging/Quantity: Bulk Packaging, 50 Units per Pack

Specifications

  • Input Voltage Range: 5V to 30V
  • Output Voltage: 3.3V
  • Maximum Output Current: 15A
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 10mA
  • Overcurrent Protection Threshold: 20A
  • Short-Circuit Protection Response Time: 5µs

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. VOUT: Output Voltage
  4. NC: Not Connected
  5. EN: Enable Pin

Functional Features

  • Voltage Regulation: Maintains stable output voltage under varying load conditions.
  • Overcurrent Protection: Safeguards against excessive current draw.
  • Short-Circuit Protection: Rapidly responds to short-circuit events to prevent damage.
  • Enable Function: Allows for remote on/off control of the device.

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Wide Input Voltage Range
  • Fast Short-Circuit Protection Response

Disadvantages

  • Relatively High Quiescent Current
  • Limited Output Current compared to some alternatives

Working Principles

The MXL15KP33CA utilizes a combination of feedback control and protection circuitry to regulate the output voltage while safeguarding against overcurrent and short-circuit events. When enabled, the device continuously monitors the input and output conditions to ensure reliable performance.

Detailed Application Field Plans

The MXL15KP33CA is well-suited for various power management applications, including: - DC-DC Converters - Battery Charging Systems - Industrial Automation Equipment - Automotive Electronics

Detailed and Complete Alternative Models

  • MXL18KP35CB: Higher Output Current (35A)
  • MXL12KP30CA: Lower Output Voltage (3.0V)
  • MXL15KP33CC: Enhanced Overcurrent Protection

In conclusion, the MXL15KP33CA offers a balance of performance and protection for voltage regulation applications, making it a versatile choice for diverse electronic systems.

[Word Count: 470]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MXL15KP33CA in technische oplossingen

  1. What is MXL15KP33CA?

    • MXL15KP33CA is a high-power transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and transients.

  2. What is the maximum clamping voltage of MXL15KP33CA?

    • The maximum clamping voltage of MXL15KP33CA is 48.4V at 100A.

  3. What is the peak pulse power of MXL15KP33CA?

    • The peak pulse power of MXL15KP33CA is 15000W for an 8/20μs waveform.

  4. What are the typical applications of MXL15KP33CA?

    • MXL15KP33CA is commonly used in surge protection for telecommunications equipment, industrial control systems, automotive electronics, and power supplies.

  5. What is the operating temperature range of MXL15KP33CA?

    • MXL15KP33CA has an operating temperature range of -55°C to +175°C.

  6. What is the breakdown voltage of MXL15KP33CA?

    • The breakdown voltage of MXL15KP33CA is 33V.

  7. Does MXL15KP33CA meet industry standards for surge protection?

    • Yes, MXL15KP33CA complies with industry standards such as IEC 61000-4-5 for surge protection.

  8. Can MXL15KP33CA be used for ESD protection?

    • MXL15KP33CA is not specifically designed for ESD protection, but it can provide some level of protection against ESD events.

  9. Is MXL15KP33CA RoHS compliant?

    • Yes, MXL15KP33CA is RoHS compliant, meaning it meets the restriction on hazardous substances requirements.

  10. What packaging options are available for MXL15KP33CA?

    • MXL15KP33CA is available in various package types, including DO-201, DO-15, and SMC packages, providing flexibility for different application requirements.