Zie specificaties voor productdetails.
MX15KP60CAE3
Introduction
MX15KP60CAE3 is a high-power transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Electronic Component
- Use: Protection against voltage transients
- Characteristics: High power handling, fast response time, low clamping voltage
- Package: Axial leaded
- Essence: TVS diode for surge protection
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on order size
Specifications
- Peak Pulse Power: 15kW
- Standoff Voltage: 60V
- Breakdown Voltage: 66.3V to 73.7V
- Maximum Clamping Voltage: 97.2V at 24A
- Operating Temperature Range: -55°C to 175°C
- Storage Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The MX15KP60CAE3 TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode
Functional Features
- Transient Voltage Suppression: Provides protection against voltage transients by diverting excessive current away from sensitive components.
- Fast Response Time: Rapidly responds to transient events, minimizing the risk of damage to connected equipment.
- High Power Handling: Capable of dissipating large amounts of energy during transient events.
Advantages and Disadvantages
Advantages
- High power handling capacity
- Fast response time
- Low clamping voltage
Disadvantages
- Higher cost compared to lower power TVS diodes
- Requires careful consideration of mounting and layout due to high power dissipation
Working Principles
During a transient event, such as a lightning strike or power surge, the MX15KP60CAE3 TVS diode conducts excess current to ground, limiting the voltage across protected circuits. This action helps prevent damage to sensitive electronic components by effectively suppressing the transient voltage.
Detailed Application Field Plans
The MX15KP60CAE3 is commonly used in the following applications: - Telecommunications Equipment: Protects sensitive communication devices from lightning-induced surges. - Industrial Control Systems: Safeguards control circuitry from voltage transients in industrial environments. - Power Supplies: Provides surge protection for power supply units in various electronic systems.
Detailed and Complete Alternative Models
- MX10KP60CAE3: Lower power variant with similar characteristics
- MX20KP60CAE3: Higher power variant with increased peak pulse power handling
In conclusion, the MX15KP60CAE3 TVS diode offers robust transient voltage suppression capabilities, making it an essential component for protecting sensitive electronic equipment from damaging voltage transients.
Word Count: 495
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van MX15KP60CAE3 in technische oplossingen
Sure, here are 10 common questions and answers related to the application of MX15KP60CAE3 in technical solutions:
Q: What is the maximum peak pulse power dissipation of MX15KP60CAE3? A: The maximum peak pulse power dissipation of MX15KP60CAE3 is 15,000 watts for a 10/1000μs waveform.
Q: What is the breakdown voltage of MX15KP60CAE3? A: The breakdown voltage of MX15KP60CAE3 is 60 volts.
Q: What is the typical clamping voltage of MX15KP60CAE3? A: The typical clamping voltage of MX15KP60CAE3 is 77.4 volts at 100A.
Q: What is the operating temperature range of MX15KP60CAE3? A: The operating temperature range of MX15KP60CAE3 is -55°C to +175°C.
Q: What is the peak pulse current capability of MX15KP60CAE3? A: The peak pulse current capability of MX15KP60CAE3 is 484.5A for an 8/20μs waveform.
Q: What is the package type of MX15KP60CAE3? A: MX15KP60CAE3 is available in a DO-203AB (DO-15) package.
Q: Can MX15KP60CAE3 be used for surge protection in power supplies? A: Yes, MX15KP60CAE3 is suitable for surge protection in power supplies due to its high power dissipation capability.
Q: Is MX15KP60CAE3 suitable for use in telecommunications equipment? A: Yes, MX15KP60CAE3 is commonly used in telecommunications equipment for transient voltage suppression.
Q: What are the key applications of MX15KP60CAE3 in automotive electronics? A: MX15KP60CAE3 is often used in automotive electronics for protecting sensitive components from voltage transients.
Q: Can MX15KP60CAE3 be used in industrial automation systems? A: Yes, MX15KP60CAE3 is well-suited for use in industrial automation systems to safeguard against voltage spikes and surges.
I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.