Microsemi Corporation
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
JANS1N4467
Details bekijken DataSheets

JANS1N4467 Diode

Introduction

The JANS1N4467 diode is a high-reliability semiconductor device that belongs to the category of rectifier diodes. It is widely used in various electronic circuits for its specific characteristics and reliability.

Basic Information Overview

  • Category: Rectifier Diode
  • Use: Used for converting alternating current (AC) to direct current (DC) in electronic circuits.
  • Characteristics: High reliability, low forward voltage drop, and fast switching speed.
  • Package: DO-41 package
  • Essence: Efficient conversion of AC to DC with minimal power loss.
  • Packaging/Quantity: Available in bulk packaging with varying quantities.

Specifications

  • Maximum Average Forward Current: 1A
  • Peak Repetitive Reverse Voltage: 100V
  • Forward Voltage Drop: 1V at 1A
  • Reverse Recovery Time: 50ns

Detailed Pin Configuration

The JANS1N4467 diode has a standard DO-41 package with two leads. The anode is connected to the positive terminal, and the cathode is connected to the negative terminal.

Functional Features

  • Efficient rectification of AC to DC.
  • Fast switching speed for rapid response in electronic circuits.
  • Low forward voltage drop minimizes power loss.

Advantages and Disadvantages

Advantages

  • High reliability suitable for critical applications.
  • Low forward voltage drop reduces power dissipation.
  • Fast switching speed enhances circuit performance.

Disadvantages

  • Relatively higher reverse recovery time compared to some modern diodes.
  • Limited peak repetitive reverse voltage compared to other high-voltage diodes.

Working Principles

The JANS1N4467 diode operates based on the principle of unidirectional conduction. When a positive voltage is applied to the anode with respect to the cathode, the diode allows current to flow, effectively converting AC to DC. In the reverse bias condition, the diode blocks the flow of current.

Detailed Application Field Plans

The JANS1N4467 diode finds extensive application in various electronic circuits, including: - Power supplies - Rectifiers - Voltage regulators - Switching circuits - Inverters

Detailed and Complete Alternative Models

  • JANS1N4466: Similar specifications with lower peak repetitive reverse voltage.
  • JANS1N4468: Higher peak repetitive reverse voltage with comparable forward voltage drop.

In conclusion, the JANS1N4467 diode is a reliable and efficient component for converting AC to DC in electronic circuits. Its specific characteristics make it suitable for a wide range of applications, despite having certain limitations compared to alternative models.

Word count: 386

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van JANS1N4467 in technische oplossingen

Sure, here are 10 common questions and answers related to the application of JANS1N4467:

  1. What is JANS1N4467?

    • JANS1N4467 is a high-reliability, military-grade silicon power rectifier diode.

  2. What are the key features of JANS1N4467?

    • The key features include high surge current capability, low forward voltage drop, and high reliability.

  3. What are the typical applications of JANS1N4467?

    • JANS1N4467 is commonly used in power supplies, inverters, converters, and other high-reliability applications in military and aerospace systems.

  4. What is the maximum forward current rating of JANS1N4467?

    • The maximum forward current rating is typically around 25 amperes.

  5. What is the reverse voltage rating of JANS1N4467?

    • The reverse voltage rating is typically around 200 volts.

  6. What is the operating temperature range for JANS1N4467?

    • The operating temperature range is usually between -65°C to +175°C.

  7. Is JANS1N4467 suitable for high-reliability applications?

    • Yes, JANS1N4467 is specifically designed and tested for high-reliability applications, making it suitable for use in critical systems.

  8. Does JANS1N4467 have any special packaging or screening requirements?

    • Yes, JANS1N4467 is typically supplied in hermetically sealed packages and undergoes stringent screening processes to ensure reliability.

  9. Can JANS1N4467 be used in commercial applications?

    • While it is designed for military and aerospace applications, JANS1N4467 can also be used in certain high-reliability commercial applications where its performance characteristics are beneficial.

  10. Are there any recommended alternative parts to JANS1N4467?

    • Some alternative parts with similar specifications include JAN, JANTX, and JANTXV versions of the 1N4467 diode, but they may not offer the same level of high-reliability as JANS1N4467.