Zie specificaties voor productdetails.
1N967B Semiconductor Diode
Product Overview
Category:
The 1N967B is a semiconductor diode belonging to the category of rectifier diodes.
Use:
It is commonly used in electronic circuits for rectification and voltage regulation purposes.
Characteristics:
- Forward Voltage Drop: 0.7V
- Reverse Voltage: 100V
- Current Rating: 1A
- Fast switching speed
Package:
The 1N967B is typically available in a DO-41 package.
Packaging/Quantity:
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Maximum Forward Voltage: 1V
- Maximum Reverse Current: 5µA
- Operating Temperature Range: -65°C to 175°C
Detailed Pin Configuration
The 1N967B has two pins, anode (A) and cathode (K), with the anode being the positive terminal and the cathode being the negative terminal.
Functional Features
- High current capability
- Low forward voltage drop
- Fast recovery time
Advantages
- Reliable and durable
- Suitable for high-frequency applications
- Low power loss
Disadvantages
- Limited reverse voltage rating compared to other diodes
- Sensitive to temperature variations
Working Principles
The 1N967B operates based on the principle of unidirectional conduction, allowing current flow in one direction while blocking it in the opposite direction.
Detailed Application Field Plans
The 1N967B is widely used in: - Power supplies - Battery chargers - Voltage regulators - Switching circuits
Detailed and Complete Alternative Models
Some alternative models to the 1N967B include: - 1N4001 - 1N4148 - 1N5819 - 1N5399
In conclusion, the 1N967B semiconductor diode is a versatile component with various applications in electronic circuits, offering reliable performance and efficient rectification capabilities.
[Word count: 298]
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 1N967B in technische oplossingen
What is 1N967B and what is its application?
- 1N967B is a silicon power rectifier diode commonly used in various technical solutions such as power supplies, voltage regulators, and inverters.
What are the key specifications of 1N967B?
- The 1N967B diode typically has a maximum repetitive peak reverse voltage of 200 volts, a forward current of 3 amperes, and a forward voltage drop of around 1 volt at the rated current.
How does 1N967B compare to other similar diodes?
- Compared to other diodes, 1N967B offers a balance of voltage and current ratings suitable for many general-purpose applications, making it a popular choice in technical solutions.
Can 1N967B be used in high-frequency applications?
- While 1N967B can operate at moderate frequencies, it may not be suitable for very high-frequency applications due to its inherent capacitance and recovery time.
What are the typical operating temperatures for 1N967B?
- The 1N967B diode is designed to operate within a temperature range of -65°C to +175°C, making it suitable for a wide range of environmental conditions.
Are there any common failure modes associated with 1N967B?
- Common failure modes for 1N967B include thermal overstress, reverse voltage breakdown, and excessive forward current leading to junction failure.
Can 1N967B be used in parallel or series configurations?
- Yes, 1N967B can be used in parallel to increase current-handling capability or in series to handle higher voltage requirements, but proper current and voltage balancing is essential.
What are some typical applications where 1N967B is commonly used?
- 1N967B is frequently employed in power supply circuits, battery chargers, voltage regulators, and motor drive circuits due to its robustness and reliability.
Does 1N967B require any special heat sinking or mounting considerations?
- Depending on the application and power dissipation, 1N967B may require appropriate heat sinking or mounting to ensure optimal thermal performance and reliability.
Where can I find detailed application notes and reference designs for using 1N967B in technical solutions?
- Detailed application notes and reference designs for 1N967B can often be found in the manufacturer's datasheets, application guides, and technical support resources. Additionally, online forums and communities may provide valuable insights and practical examples of its usage in various technical solutions.