Microsemi Corporation
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
1N5221BE3
Details bekijken DataSheets

1N5221BE3

Product Overview

Category

The 1N5221BE3 belongs to the category of Zener diodes.

Use

It is commonly used for voltage regulation and transient suppression in electronic circuits.

Characteristics

  • Zener voltage: 4.3V
  • Power dissipation: 1.5W
  • Package type: DO-35
  • Operating temperature range: -65°C to +200°C
  • Packaging/Quantity: Available in tape and reel packaging, with quantities varying based on supplier.

Specifications

  • Zener Voltage: 4.3V
  • Power Dissipation: 1.5W
  • Forward Voltage: 1.2V
  • Reverse Current: 5μA
  • Temperature Coefficient: 5mV/°C

Detailed Pin Configuration

The 1N5221BE3 Zener diode has two pins, with the cathode being marked by a band around one end of the diode.

Functional Features

  • Precise voltage regulation
  • Transient suppression
  • Reliable performance under varying temperatures

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • High power dissipation capability
  • Wide operating temperature range

Disadvantages

  • Limited current handling capacity
  • Sensitive to temperature fluctuations

Working Principles

The 1N5221BE3 Zener diode operates by maintaining a constant voltage drop across its terminals when it is reverse-biased, allowing it to regulate voltage in electronic circuits.

Detailed Application Field Plans

The 1N5221BE3 is widely used in: - Voltage regulators - Overvoltage protection circuits - Signal clamping applications

Detailed and Complete Alternative Models

Some alternative models to the 1N5221BE3 include: - 1N5221B - 1N5221A - BZX85C4V3

In conclusion, the 1N5221BE3 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and transient suppression. Its characteristics, specifications, and application field plans make it an essential part of various electronic devices and systems.

[Word count: 298]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 1N5221BE3 in technische oplossingen

  1. What is the 1N5221BE3 diode used for?

    • The 1N5221BE3 diode is commonly used as a voltage regulator in various technical solutions.

  2. What is the maximum forward voltage of the 1N5221BE3 diode?

    • The maximum forward voltage of the 1N5221BE3 diode is typically around 1.1 volts.

  3. What is the maximum reverse voltage of the 1N5221BE3 diode?

    • The maximum reverse voltage of the 1N5221BE3 diode is usually around 100 volts.

  4. What are the typical applications of the 1N5221BE3 diode?

    • The 1N5221BE3 diode is commonly used in power supplies, voltage regulators, and other electronic circuits requiring stable voltage references.

  5. What is the maximum current rating of the 1N5221BE3 diode?

    • The maximum current rating of the 1N5221BE3 diode is typically around 500 milliamps.

  6. What is the temperature range for the 1N5221BE3 diode?

    • The 1N5221BE3 diode is designed to operate within a temperature range of -65°C to +200°C.

  7. Can the 1N5221BE3 diode be used for overvoltage protection?

    • Yes, the 1N5221BE3 diode can be used for overvoltage protection due to its ability to handle reverse voltages.

  8. Is the 1N5221BE3 diode suitable for low-power applications?

    • Yes, the 1N5221BE3 diode is suitable for low-power applications due to its relatively low current rating.

  9. What is the package type of the 1N5221BE3 diode?

    • The 1N5221BE3 diode is typically available in a DO-35 package.

  10. Are there any common failure modes associated with the 1N5221BE3 diode?

    • Common failure modes for the 1N5221BE3 diode include thermal runaway under high current conditions and breakdown due to excessive reverse voltage.