Microsemi Corporation
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
1N4895
Details bekijken DataSheets

1N4895 Diode

Product Information

Category:

The 1N4895 diode belongs to the category of semiconductor devices.

Use:

It is commonly used as a rectifier in electronic circuits to convert alternating current (AC) to direct current (DC).

Characteristics:

  • Forward Voltage Drop: Typically around 0.7V
  • Reverse Voltage: Up to 200V
  • Current Rating: Varies based on specific model

Package:

The 1N4895 diode is typically available in a DO-41 package, which is a cylindrical axial-lead package.

Essence:

This diode is essential for converting AC to DC and preventing reverse flow of current in electronic circuits.

Packaging/Quantity:

The 1N4895 diode is usually packaged in reels or tubes, with quantities varying based on manufacturer and supplier.

Specifications

  • Maximum Reverse Voltage: 200V
  • Average Rectified Current: Varies based on specific model
  • Forward Voltage Drop: Typically around 0.7V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The 1N4895 diode has two leads, an anode and a cathode. The anode is typically marked with a band or other indicator on the body of the diode.

Functional Features

The 1N4895 diode acts as a one-way valve for electric current, allowing current to flow in only one direction and blocking it in the opposite direction.

Advantages and Disadvantages

Advantages

  • Efficient conversion of AC to DC
  • Small form factor
  • Low cost

Disadvantages

  • Limited maximum reverse voltage
  • Forward voltage drop may cause power loss in high-current applications

Working Principles

When the diode is forward-biased, it allows current to flow through it. When reverse-biased, it blocks the flow of current.

Detailed Application Field Plans

The 1N4895 diode finds applications in various electronic circuits, including: - Power supplies - Battery chargers - Voltage regulators - Signal demodulation circuits

Detailed and Complete Alternative Models

Some alternative models to the 1N4895 diode include: - 1N4001 - 1N4148 - 1N5408 - 1N5819

In conclusion, the 1N4895 diode is a crucial component in electronic circuits, serving the purpose of rectification and current flow control. Its characteristics, specifications, and application field plans make it a versatile and widely used semiconductor device.

[Word Count: 330]

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van 1N4895 in technische oplossingen

  1. What is 1N4895?

    • 1N4895 is a silicon rectifier diode commonly used in electronic circuits for converting alternating current (AC) to direct current (DC).

  2. What are the key specifications of 1N4895?

    • The 1N4895 diode has a maximum repetitive peak reverse voltage of 200 volts, a maximum average forward rectified current of 1 ampere, and a typical forward voltage drop of 1 volt at 1 ampere.

  3. How is 1N4895 typically used in technical solutions?

    • 1N4895 diodes are often used in power supply circuits, battery chargers, voltage regulators, and other applications where AC to DC conversion is required.

  4. What are the important considerations when using 1N4895 in a circuit?

    • It's crucial to consider the maximum voltage and current requirements of the circuit, as well as the thermal characteristics of the diode to ensure proper heat dissipation.

  5. Can 1N4895 be used for high-frequency applications?

    • No, 1N4895 is not suitable for high-frequency applications due to its relatively slow recovery time.

  6. Are there any common alternatives to 1N4895?

    • Yes, other silicon rectifier diodes such as 1N400x series or 1N540x series can be used as alternatives depending on the specific application requirements.

  7. What are the typical failure modes of 1N4895?

    • Common failure modes include overvoltage breakdown, excessive forward current causing overheating, and physical damage due to improper handling.

  8. How should 1N4895 diodes be stored and handled?

    • They should be stored in a cool, dry place and handled with care to avoid static discharge and physical damage.

  9. Can 1N4895 be used in automotive applications?

    • Yes, 1N4895 diodes can be used in automotive circuits for various purposes such as voltage regulation and rectification.

  10. Where can I find detailed technical information about 1N4895?

    • Detailed datasheets and application notes for 1N4895 can be found on semiconductor manufacturers' websites or electronic component distributors' platforms.