Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
VN0106N3-G-P003
Details bekijken DataSheets

VN0106N3-G-P003

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-252-3
Essence: Regulates voltage for electronic devices
Packaging/Quantity: Tape & Reel, 2500 units

Specifications

  • Input Voltage: 4.5V to 18V
  • Output Voltage: 1.2V to 15V
  • Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse polarity protection

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact package size

Disadvantages: - Limited output current - Sensitive to input voltage fluctuations

Working Principles

The VN0106N3-G-P003 regulates the output voltage by comparing it to a reference voltage and adjusting the pass transistor to maintain a stable output.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Automotive electronics
  3. Industrial control systems

Detailed and Complete Alternative Models

  1. LM317
  2. LT1086
  3. ADP3338

This integrated circuit is widely used in various applications due to its high efficiency and compact design, making it suitable for battery-powered devices, automotive electronics, and industrial control systems. While it has limitations in terms of output current and sensitivity to input voltage fluctuations, there are alternative models available to suit specific requirements.

Word count: 251

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van VN0106N3-G-P003 in technische oplossingen

  1. What is the maximum voltage rating for VN0106N3-G-P003?

    • The maximum voltage rating for VN0106N3-G-P003 is 60 volts.

  2. What is the maximum current rating for VN0106N3-G-P003?

    • The maximum continuous current rating for VN0106N3-G-P003 is 100 mA.

  3. What is the typical on-state resistance for VN0106N3-G-P003?

    • The typical on-state resistance for VN0106N3-G-P003 is 5 ohms.

  4. What is the maximum power dissipation for VN0106N3-G-P003?

    • The maximum power dissipation for VN0106N3-G-P003 is 625 mW.

  5. What are the typical applications for VN0106N3-G-P003?

    • VN0106N3-G-P003 is commonly used in relay and solenoid drivers, lamp drivers, and small motor control circuits.

  6. What is the operating temperature range for VN0106N3-G-P003?

    • The operating temperature range for VN0106N3-G-P003 is -40°C to 125°C.

  7. Is VN0106N3-G-P003 suitable for automotive applications?

    • Yes, VN0106N3-G-P003 is suitable for automotive applications as it is AEC-Q101 qualified.

  8. Does VN0106N3-G-P003 have built-in protection features?

    • Yes, VN0106N3-G-P003 has built-in thermal shutdown and overcurrent protection.

  9. Can VN0106N3-G-P003 be used in high-side or low-side switch configurations?

    • VN0106N3-G-P003 can be used in both high-side and low-side switch configurations.

  10. What is the package type for VN0106N3-G-P003?

    • VN0106N3-G-P003 is available in a DPAK (TO-252) package.