Zie specificaties voor productdetails.
TC1303B-PI0EUN
Product Overview
Category
The TC1303B-PI0EUN belongs to the category of integrated voltage regulators.
Use
This product is primarily used for voltage regulation in electronic devices and circuits.
Characteristics
- Integrated voltage regulator with high efficiency.
- Low dropout voltage.
- Wide input voltage range.
- Adjustable output voltage.
- Overcurrent and thermal protection features.
Package
The TC1303B-PI0EUN comes in a compact surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic components, ensuring their proper functioning.
Packaging/Quantity
The TC1303B-PI0EUN is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 0.8V - 5.0V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 300mA
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The TC1303B-PI0EUN has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
Functional Features
- High efficiency conversion of input voltage to regulated output voltage.
- Overcurrent protection safeguards against excessive current flow.
- Thermal protection prevents overheating of the device.
- Adjustable output voltage allows customization for specific applications.
- Low dropout voltage ensures efficient power transfer.
Advantages and Disadvantages
Advantages
- High efficiency results in minimal power loss.
- Wide input voltage range accommodates various power sources.
- Compact package size saves board space.
- Overcurrent and thermal protection enhance device reliability.
- Adjustable output voltage provides flexibility.
Disadvantages
- Maximum output current may limit usage in high-power applications.
- Limited output voltage range may not suit all requirements.
- Quiescent current consumption may affect battery life in low-power devices.
Working Principles
The TC1303B-PI0EUN operates based on a voltage regulation principle known as a linear regulator. It takes an input voltage within the specified range and regulates it to a stable output voltage, regardless of any fluctuations in the input voltage or load conditions. This is achieved by using internal circuitry that adjusts the voltage difference between the input and desired output voltage.
Detailed Application Field Plans
The TC1303B-PI0EUN finds application in various electronic devices and circuits, including but not limited to: - Battery-powered portable devices - IoT (Internet of Things) devices - Wearable electronics - Embedded systems - Consumer electronics
Detailed and Complete Alternative Models
- TC1303A-PI0EUN: Similar to TC1303B-PI0EUN, but with a lower maximum output current of 200mA.
- TC1303C-PI0EUN: Similar to TC1303B-PI0EUN, but with a higher maximum output current of 500mA.
- TC1303D-PI0EUN: Similar to TC1303B-PI0EUN, but with additional features such as adjustable soft-start and power good indicator.
These alternative models provide options for different current requirements and additional functionalities, catering to diverse application needs.
In conclusion, the TC1303B-PI0EUN is an integrated voltage regulator with high efficiency, wide input voltage range, and adjustable output voltage. It offers overcurrent and thermal protection features, making it suitable for various electronic applications. While it has certain limitations, alternative models provide options to address specific requirements.
Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TC1303B-PI0EUN in technische oplossingen
Sure! Here are 10 common questions and answers related to the application of TC1303B-PI0EUN in technical solutions:
Q: What is TC1303B-PI0EUN? A: TC1303B-PI0EUN is a specific model of a voltage regulator IC (integrated circuit) used for power management in electronic devices.
Q: What is the input voltage range of TC1303B-PI0EUN? A: The input voltage range of TC1303B-PI0EUN is typically between 2.5V and 6.0V.
Q: What is the output voltage range of TC1303B-PI0EUN? A: The output voltage range of TC1303B-PI0EUN can be adjusted from 0.8V to 5.5V using external resistors.
Q: What is the maximum output current of TC1303B-PI0EUN? A: The maximum output current of TC1303B-PI0EUN is typically around 500mA.
Q: What is the purpose of using TC1303B-PI0EUN in technical solutions? A: TC1303B-PI0EUN is commonly used to regulate and stabilize the voltage supplied to various components in electronic circuits, ensuring proper functionality and protection against voltage fluctuations.
Q: Can TC1303B-PI0EUN be used in battery-powered applications? A: Yes, TC1303B-PI0EUN is suitable for battery-powered applications as it has low quiescent current and supports efficient power conversion.
Q: Is TC1303B-PI0EUN compatible with both analog and digital circuits? A: Yes, TC1303B-PI0EUN can be used with both analog and digital circuits as it provides stable voltage output for various types of components.
Q: Does TC1303B-PI0EUN have built-in protection features? A: Yes, TC1303B-PI0EUN includes built-in protection features such as thermal shutdown, current limit, and short-circuit protection to safeguard the circuit and connected devices.
Q: Can TC1303B-PI0EUN operate in a wide temperature range? A: Yes, TC1303B-PI0EUN is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.
Q: Are there any application notes or reference designs available for TC1303B-PI0EUN? A: Yes, the manufacturer of TC1303B-PI0EUN provides application notes and reference designs that can help engineers and designers implement the IC effectively in their technical solutions.
Please note that the specific details mentioned above may vary depending on the datasheet and specifications provided by the manufacturer of TC1303B-PI0EUN.