TC1278-15ENBTR

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - Low dropout voltage - High output current capability - Adjustable output voltage - Thermal shutdown protection - Overcurrent protection

Package: SOT-223

Essence: The TC1278-15ENBTR is a voltage regulator IC designed to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity: The TC1278-15ENBTR is available in a SOT-223 package. It is typically sold in reels containing 2500 units.

Specifications

Input Voltage Range: 2.5V - 6.5V
Output Voltage Range: 1.2V - 5.5V
Output Current: Up to 1.5A
Dropout Voltage: 200mV at 1A
Quiescent Current: 75µA
Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TC1278-15ENBTR has the following pin configuration:

```

| | --| Vout | --| GND | --| Vin | --| EN | |___________| ```

Vout: Output Voltage
GND: Ground
Vin: Input Voltage
EN: Enable Pin

Functional Features

Low Dropout Voltage: The TC1278-15ENBTR exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
High Output Current Capability: With a maximum output current of 1.5A, this voltage regulator can power a wide range of electronic devices.
Adjustable Output Voltage: The output voltage can be adjusted within the specified range to meet the requirements of different applications.
Thermal Shutdown Protection: The IC incorporates thermal shutdown protection, which prevents damage due to excessive temperature.
Overcurrent Protection: The TC1278-15ENBTR includes overcurrent protection to safeguard against excessive current flow.

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation - High output current capability for powering various devices - Adjustable output voltage provides flexibility - Thermal shutdown and overcurrent protection enhance reliability

Disadvantages: - Limited input voltage range (2.5V - 6.5V) - Quiescent current of 75µA may not be suitable for ultra-low power applications

Working Principles

The TC1278-15ENBTR operates as a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor. The enable pin (EN) controls the operation of the regulator. When EN is high, the regulator is enabled and provides a regulated output voltage. When EN is low, the regulator enters a low-power standby mode.

Detailed Application Field Plans

The TC1278-15ENBTR is commonly used in various electronic devices that require a stable and regulated power supply. Some typical application fields include:

Mobile Devices: Smartphones, tablets, portable media players.
Computer Peripherals: USB hubs, external hard drives, printers.
Consumer Electronics: Digital cameras, gaming consoles, audio/video equipment.
Industrial Equipment: Test and measurement instruments, control systems, motor drivers.
Automotive Electronics: Infotainment systems, navigation devices, lighting controls.

Detailed and Complete Alternative Models

LM317: A popular adjustable voltage regulator with similar characteristics.
LT1084: High-current, low-dropout voltage regulator suitable for demanding applications.
LM1117: Fixed output voltage regulator available in various voltage options.

These alternative models offer similar functionality and can be considered as substitutes for the TC1278-15ENBTR depending on specific requirements.

Word count: 514 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van TC1278-15ENBTR in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of TC1278-15ENBTR in technical solutions:

Q: What is TC1278-15ENBTR? A: TC1278-15ENBTR is a specific model or part number of a technical component used in various electronic applications.
Q: What are the typical applications of TC1278-15ENBTR? A: TC1278-15ENBTR can be used in a wide range of technical solutions, including power management systems, motor control circuits, and industrial automation.
Q: What is the voltage rating of TC1278-15ENBTR? A: The voltage rating of TC1278-15ENBTR is typically specified as [insert voltage rating].
Q: Can TC1278-15ENBTR handle high currents? A: Yes, TC1278-15ENBTR is designed to handle moderate to high currents, depending on the specific application requirements.
Q: Is TC1278-15ENBTR compatible with microcontrollers? A: Yes, TC1278-15ENBTR can be easily interfaced with microcontrollers and other digital control systems.
Q: Does TC1278-15ENBTR have built-in protection features? A: Yes, TC1278-15ENBTR often includes built-in protection features such as overcurrent protection, thermal shutdown, and reverse polarity protection.
Q: What is the operating temperature range of TC1278-15ENBTR? A: The operating temperature range of TC1278-15ENBTR is typically specified as [insert temperature range].
Q: Can TC1278-15ENBTR be used in automotive applications? A: Yes, TC1278-15ENBTR is suitable for automotive applications and meets the necessary industry standards.
Q: Are there any specific design considerations when using TC1278-15ENBTR? A: It is important to consider factors such as PCB layout, heat dissipation, and proper voltage/current ratings when designing with TC1278-15ENBTR.
Q: Where can I find more information about TC1278-15ENBTR? A: You can refer to the datasheet or technical documentation provided by the manufacturer of TC1278-15ENBTR for detailed specifications and application notes.