Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
SST25VF080B-50-4C-QAF

SST25VF080B-50-4C-QAF

Product Overview

Category

The SST25VF080B-50-4C-QAF belongs to the category of Serial Flash Memory.

Use

This product is primarily used for storing and retrieving digital data in electronic devices such as microcontrollers, embedded systems, and other applications that require non-volatile memory storage.

Characteristics

  • High-speed performance: The SST25VF080B-50-4C-QAF offers fast read and write operations, making it suitable for time-critical applications.
  • Large storage capacity: With a capacity of 8 megabits (1 megabyte), this flash memory chip provides ample space for data storage.
  • Low power consumption: The device operates at low power levels, ensuring energy efficiency in battery-powered devices.
  • Reliable data retention: The SST25VF080B-50-4C-QAF maintains data integrity even during power loss or system failures.
  • Wide operating voltage range: It can operate within a voltage range of 2.7V to 3.6V, making it compatible with various electronic systems.

Package and Quantity

The SST25VF080B-50-4C-QAF is available in a compact 8-pin SOIC (Small Outline Integrated Circuit) package. It is typically sold in reels containing a quantity of 250 units.

Specifications

  • Memory Capacity: 8 megabits (1 megabyte)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 100,000 cycles
  • Data Retention: 20 years

Pin Configuration

The SST25VF080B-50-4C-QAF features the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | CS# | Chip Select (active low) | | 2 | SO | Serial Data Output | | 3 | WP# | Write Protect (active low) | | 4 | GND | Ground | | 5 | SI | Serial Data Input | | 6 | SCK | Serial Clock | | 7 | HOLD# | Hold (active low) | | 8 | VCC | Power Supply Voltage |

Functional Features

  • High-speed read and write operations
  • Sector erase capability for efficient data management
  • Software and hardware protection mechanisms to prevent unauthorized access or modification of data
  • Flexible programming options, including byte programming and page programming
  • Efficient power management features, such as deep power-down mode and standby current reduction

Advantages and Disadvantages

Advantages

  • Fast read and write operations enhance overall system performance.
  • Large storage capacity accommodates extensive data requirements.
  • Low power consumption prolongs battery life in portable devices.
  • Reliable data retention ensures data integrity over extended periods.
  • Wide operating voltage range provides compatibility with various systems.

Disadvantages

  • Limited storage capacity compared to higher-capacity flash memory chips.
  • Higher cost per megabyte compared to larger capacity alternatives.
  • Limited availability of alternative models with similar specifications.

Working Principles

The SST25VF080B-50-4C-QAF utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed. The SPI interface allows for high-speed data transfer between the flash memory and the host device, enabling efficient read and write operations.

Detailed Application Field Plans

The SST25VF080B-50-4C-QAF finds applications in various fields, including but not limited to: - Consumer electronics: Used for firmware storage in smartphones, tablets, digital cameras, and gaming consoles. - Industrial automation: Enables program storage in programmable logic controllers (PLCs) and industrial control systems. - Automotive electronics: Utilized for storing critical data in automotive ECUs (Engine Control Units), infotainment systems, and instrument clusters. - Medical devices: Provides non-volatile memory storage for medical equipment firmware and patient data.

Detailed and Complete Alternative Models

While the SST25VF080B-50-4C-QAF is a reliable flash memory chip, alternative models with similar specifications include: - Winbond W25Q80BV - Macronix MX25L8006E - Microchip SST25VF080B

These alternatives offer comparable features and can be considered based on availability and specific project requirements.

Word count: 570 words

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van SST25VF080B-50-4C-QAF in technische oplossingen

Sure! Here are 10 common questions and answers related to the application of SST25VF080B-50-4C-QAF in technical solutions:

  1. Q: What is the SST25VF080B-50-4C-QAF? A: The SST25VF080B-50-4C-QAF is a serial flash memory device manufactured by Microchip Technology.

  2. Q: What is the capacity of the SST25VF080B-50-4C-QAF? A: The SST25VF080B-50-4C-QAF has a capacity of 8 megabits (1 megabyte).

  3. Q: What is the operating voltage range for this flash memory? A: The SST25VF080B-50-4C-QAF operates within a voltage range of 2.7V to 3.6V.

  4. Q: What is the maximum clock frequency supported by this device? A: The SST25VF080B-50-4C-QAF supports a maximum clock frequency of 50 MHz.

  5. Q: Can I use this flash memory for code storage in microcontrollers? A: Yes, the SST25VF080B-50-4C-QAF can be used for storing code in microcontrollers or other embedded systems.

  6. Q: Does this flash memory support both read and write operations? A: Yes, the SST25VF080B-50-4C-QAF supports both read and write operations.

  7. Q: What is the typical endurance of this flash memory? A: The SST25VF080B-50-4C-QAF has a typical endurance of 100,000 write cycles per sector.

  8. Q: Is this flash memory compatible with SPI interface? A: Yes, the SST25VF080B-50-4C-QAF uses a Serial Peripheral Interface (SPI) for communication.

  9. Q: Can I use this flash memory in automotive applications? A: Yes, the SST25VF080B-50-4C-QAF is designed to meet the requirements of automotive applications.

  10. Q: Are there any specific temperature ranges for operating this flash memory? A: The SST25VF080B-50-4C-QAF is specified to operate within the temperature range of -40°C to +85°C.

Please note that these answers are general and may vary depending on the specific application and requirements.