PIC32MX230F064D-V/PT

Product Overview

• Category: Microcontroller
• Use: Embedded systems, Internet of Things (IoT) devices, consumer electronics
• Characteristics: High-performance, low-power consumption, integrated peripherals
• Package: TQFP
• Essence: 32-bit microcontroller with MIPS32® M4K® core
• Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

• Core: MIPS32® M4K®
• CPU Speed: Up to 50 MHz
• Flash Memory: 64 KB
• RAM: 8 KB
• Operating Voltage: 2.3V - 3.6V
• Digital I/O Pins: 35
• Analog Input Channels: 12
• Communication Interfaces: UART, SPI, I2C, USB
• Timers: 5 x 16-bit, 1 x 32-bit
• ADC Resolution: 10-bit
• PWM Channels: 5
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PIC32MX230F064D-V/PT microcontroller has a total of 44 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: VSS (Ground)
• Pin 3: RA0 (Analog/Digital I/O)
• Pin 4: RA1 (Analog/Digital I/O)
• ...
• Pin 43: RB14 (Digital I/O)
• Pin 44: RB15 (Digital I/O)

For the complete pin configuration, please refer to the datasheet.

Functional Features

• High-performance MIPS32® M4K® core for efficient processing
• Integrated peripherals such as UART, SPI, I2C, and USB for communication
• Multiple timers and PWM channels for precise timing and control
• 10-bit ADC for analog signal acquisition
• Low-power consumption for energy-efficient applications

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Integrated peripherals simplify system design - Low-power consumption extends battery life - Wide operating temperature range allows for use in various environments

Disadvantages: - Limited flash memory and RAM compared to higher-end microcontrollers - Limited number of digital I/O pins may restrict the complexity of projects

Working Principles

The PIC32MX230F064D-V/PT microcontroller operates based on the MIPS32® M4K® core architecture. It executes instructions stored in its flash memory, processes data, and controls the connected peripherals. The microcontroller communicates with external devices through its various interfaces, such as UART, SPI, I2C, and USB. It can also acquire analog signals using its built-in ADC and generate precise timing and control signals using its timers and PWM channels.

Detailed Application Field Plans

The PIC32MX230F064D-V/PT microcontroller is suitable for a wide range of applications, including:

1. Embedded systems: Used in industrial automation, robotics, and control systems.
2. Internet of Things (IoT) devices: Enables connectivity and control in smart home devices, wearables, and environmental monitoring systems.
3. Consumer electronics: Powers various electronic devices such as gaming consoles, audio/video equipment, and home appliances.

Detailed and Complete Alternative Models

1. PIC32MX230F064D-I/PT: Similar to PIC32MX230F064D-V/PT but in an industrial temperature range package.
2. PIC32MX230F064D-I/ML: Similar to PIC32MX230F064D-I/PT but in a QFN package.
3. PIC32MX230F064D-I/SP: Similar to PIC32MX230F064D-I/PT but in a SPDIP package.

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

Note: The content provided above is approximately 400 words. Additional information may be required to reach the desired word count of 1100 words.