Microchip Technology
Afbeelding kan een representatie zijn.
Zie specificaties voor productdetails.
PIC18F4220-I/P
Details bekijken DataSheets

PIC18F4220-I/P

Product Overview

Category

The PIC18F4220-I/P belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems for controlling and processing data.

Characteristics

  • High-performance 8-bit architecture
  • Flash program memory
  • Low power consumption
  • Wide operating voltage range
  • Enhanced features for efficient code execution
  • Integrated peripherals for versatile applications

Package

The PIC18F4220-I/P is available in a 40-pin PDIP (Plastic Dual In-line Package) format.

Essence

The essence of the PIC18F4220-I/P lies in its ability to provide a powerful and flexible platform for developing advanced control systems and applications.

Packaging/Quantity

The PIC18F4220-I/P is typically packaged in tubes or trays, with quantities varying based on customer requirements.

Specifications

  • Microcontroller Family: PIC18F
  • Core Size: 8-bit
  • Program Memory Size: 16KB
  • RAM Size: 1.5KB
  • Number of I/O Pins: 33
  • Operating Voltage Range: 2.0V to 5.5V
  • Maximum CPU Speed: 40 MHz
  • Data Bus Width: 8-bit
  • ADC Resolution: 10-bit
  • Number of Timers: 4
  • Communication Interfaces: UART, SPI, I2C

Detailed Pin Configuration

The PIC18F4220-I/P has a total of 40 pins, each serving a specific purpose. Here is a detailed pin configuration:

  1. VDD - Power supply voltage
  2. RA0 - General-purpose I/O pin
  3. RA1 - General-purpose I/O pin
  4. RA2 - General-purpose I/O pin
  5. RA3 - General-purpose I/O pin
  6. RA4 - General-purpose I/O pin
  7. RA5 - General-purpose I/O pin
  8. VSS - Ground
  9. OSC1/CLKIN - Oscillator input
  10. OSC2/CLKOUT - Oscillator output
  11. RC0 - General-purpose I/O pin
  12. RC1 - General-purpose I/O pin
  13. RC2 - General-purpose I/O pin
  14. RC3 - General-purpose I/O pin
  15. RC4 - General-purpose I/O pin
  16. RC5 - General-purpose I/O pin
  17. RB0/INT0 - External interrupt input
  18. RB1/INT1 - External interrupt input
  19. RB2/INT2 - External interrupt input
  20. RB3/INT3 - External interrupt input
  21. RB4 - General-purpose I/O pin
  22. RB5 - General-purpose I/O pin
  23. RB6 - General-purpose I/O pin
  24. RB7 - General-purpose I/O pin
  25. RB8 - General-purpose I/O pin
  26. RB9 - General-purpose I/O pin
  27. RB10 - General-purpose I/O pin
  28. RB11 - General-purpose I/O pin
  29. RB12 - General-purpose I/O pin
  30. RB13 - General-purpose I/O pin
  31. RB14 - General-purpose I/O pin
  32. RB15 - General-purpose I/O pin
  33. VCAP - Capacitor connection for internal voltage regulator
  34. VUSB - USB power supply
  35. VDD - Power supply voltage
  36. D+ - USB data line
  37. D- - USB data line
  38. VSS - Ground
  39. AVDD - Analog power supply voltage
  40. AVSS - Analog ground

Functional Features

The PIC18F4220-I/P offers several functional features that enhance its usability and performance:

  • Flash program memory for storing user code
  • EEPROM data memory for non-volatile storage
  • Enhanced Capture/Compare/PWM (ECCP) module for precise timing control
  • Analog-to-Digital Converter (ADC) for analog signal processing
  • Universal Synchronous Asynchronous Receiver Transmitter (USART) for serial communication
  • Master Synchronous Serial Port (MSSP) supporting I2C and SPI protocols
  • Timers and counters for accurate timekeeping and event management
  • Interrupt handling mechanism for efficient multitasking

Advantages and Disadvantages

Advantages

  • High-performance architecture enables fast and efficient execution of code.
  • Wide operating voltage range allows compatibility with various power sources.
  • Integrated peripherals provide versatility and reduce external component count.
  • Low power consumption extends battery life in portable applications.
  • Ample program and data memory for complex applications.

Disadvantages

  • Limited number of I/O pins may restrict the connectivity options in certain projects.
  • Lack of built-in Ethernet or Wi-Fi connectivity requires additional components for networking capabilities.

Noem 10 veelgestelde vragen en antwoorden met betrekking tot de toepassing van PIC18F4220-I/P in technische oplossingen

  1. What is the maximum operating frequency of PIC18F4220-I/P?
    - The maximum operating frequency of PIC18F4220-I/P is 40 MHz.

  2. How many I/O pins does PIC18F4220-I/P have?
    - PIC18F4220-I/P has 33 I/O pins.

  3. What are the communication interfaces supported by PIC18F4220-I/P?
    - PIC18F4220-I/P supports SPI, I2C, and USART communication interfaces.

  4. Can PIC18F4220-I/P be used for motor control applications?
    - Yes, PIC18F4220-I/P can be used for motor control applications with its PWM and timer modules.

  5. What is the flash memory size of PIC18F4220-I/P?
    - PIC18F4220-I/P has 4 KB of flash memory.

  6. Does PIC18F4220-I/P have analog-to-digital conversion (ADC) capability?
    - Yes, PIC18F4220-I/P has a 10-bit ADC module.

  7. Is PIC18F4220-I/P suitable for battery-powered applications?
    - Yes, PIC18F4220-I/P is suitable for battery-powered applications due to its low power consumption features.

  8. Can PIC18F4220-I/P be programmed using C language?
    - Yes, PIC18F4220-I/P can be programmed using C language with the MPLAB XC8 compiler.

  9. What are the available development tools for PIC18F4220-I/P?
    - Development tools such as MPLAB X IDE and PICkit programmers are available for PIC18F4220-I/P.

  10. Is PIC18F4220-I/P suitable for industrial control applications?
    - Yes, PIC18F4220-I/P is suitable for industrial control applications with its robust peripherals and communication capabilities.